A. Mette

Comprehensive analysis of advanced solar cell contacts consisting of printed fine-line seed layers thickened by silver plating (2009)

Pysch, D., Mette, A., Filipovic, A., Glunz, S.W.

This work presents a detailed analysis of a new two-layer process to contact industrial solar cells. However, most of the results seem to be transferable to standard screen print paste contacts. The...

Thermal oxidation for crystalline silicon solar cells exceeding 19% efficiency applying industrially feasible process technology (2008)

Schultz, O., Mette, A., Hermle, M., Glunz, S.W.

Progress in advanced metallization technology at Fraunhofer ISE (2008)

Glunz, S.W., Aleman, M., Bartsch, J., Bay, J., Bayer, K., Bergander, R., ...

Fraunhofer ISE's concept for an advanced metallization of silicon solar cells is based on a two-step process: the deposition of a seed layer to form a mechanical and electrical contact and the...

Verfahren und Vorrichtung zum Strukturieren einer Oberflaechenschicht (2007)

Kray, D., Biro, D., Mette, A.

DE 102006003606 A1 UPAB: 20070924 NOVELTY - Method for structuring a surface layer (9) on a substrate (8) comprises guiding a liquid jet (6) directed onto the surface layer over the regions of the...

Series resistance characterization of industrial silicon solar cells with screen-printed contacts using hotmelt paste (2007)

Mette, A., Pysch, D., Emanuel, G., Erath, D., Preu, R., Glunz, S.W.

This work presents the results of a detailed series resistance characterization of silicon solar cells with screen-printed front contacts using hotmelt silver paste. Applying the hotmelt technology...

A review and comparison of different methods to determine the series resistance of solar cells (2007)

Pysch, D., Mette, A., Glunz, S.W.

Metal aerosol jet printing for solar cell metallization (2007)

Mette, A., Richter, P.L., Hörteis, M., Glunz, S.W.

Further progress in metal aerosol jet printing for front side metallization of silicon solar cells (2007)

Hörteis, M., Mette, A., Richter, P.L., Fidorra, F., Glunz, S.W.

Detailed analysis of fine line printed and plated solar cell contacts (2007)

Pysch, D., Mette, A., Filipovic, A., Glunz, S.W.

Silicon solar cells with screen-printed front side metallization exceeding 19% efficiency (2007)

Schultz, O., Mette, A., Preu, R., Glunz, S.W.

New concepts for front side metallization of industrial silicon solar cells (2007)

Mette, A.

Verfahren zur Präzisionsbearbeitung von Substraten und dessen Verwendung (2007)

Mayer, K., Aleman, M., Kray, D., Glunz, S., Mette, A., Preu, R., ...

WO 2008107194 A2 UPAB: 20080930 NOVELTY - In a precision process to modify the microstructure of a thin layer for the local introduction of doping agents and local application of a seed layer, the...

Laser micro-sintering as a new metallization technique for silicon solar cells (2006)

Aleman, M., Streek, A., Regenfuß, P., Mette, A., Ebert, R., Exner, H., ...

Neue Siebdrucktechnologie erhöht den Wirkungsgrad von Solarzellen (2006)

Erath, D., Mette, A., Hübner, G.

Novel metal jet printing technique for the front side metallization of highly efficient industrial silicon solar cells (2006)

Mette, A., Richter, P., Glunz, S., Willeke, G.

High efficiencies on large area screen printed silicon solar cells and contacting high (2006)

Mette, A., Emanuel, G., Erath, D., Preu, R., Willeke, G.

Increasing the efficiency of screen-printed silicon solar cells by light-induced silver plating (2006)

Mette, A., Schetter, C., Wissen, D., Lust, S., Glunz, S., Willeke, G.

Verfahren zum Herstellen einer metallischen Kontaktstruktur einer Solarzelle (2006)

Mette, A., Schetter, C., Glunz, S., Richter, P.

WO 2007085448 A1 UPAB: 20071008 NOVELTY - A method for manufacturing a metallic contact structure involves initially mounting a metallic contact structure on the surface (5) of the solar cell and...

Verfahren zum Aufbringen von elektrischen Kontakten auf halbleitende Substrate, halbleitendes Substrat und Verwendung des Verfahrens (2006)

Aleman, M., Mette, A., Glunz, S., Preu, R.

DE 102006040352 B3 UPAB: 20071031 NOVELTY - The method involves applying a layer of metallic powder (4) on a semiconductor substrate e.g. solar cell, and guiding a laser beam over the substrate for...

Hot melt ink for the front side metallisation of silicon solar cells (2005)

Mette, A., Erath, D., Ruiz, R., Emanuel, G., Kasper, E., Preu, R.