Optimierung von Dünnschichtsystemen (2009)
Wielage, B., Wank, A., Rupprecht, C., Schmidt, G., Stark, S.
For lightweight construction the use of high-strength aluminium alloys plays an increasing role. Hence, in forming processes tools are subject to severe stress. Especially abrasive wear and adhesive...
Auslegung beschichteter Werkzeuge zur Umformung hochfester Aluminiumwerkstoffe (2009)
Neugebauer, R., Schmidt, G., Stark, S., Wielage, B., Wank, A., Rupprecht, C.
For lightweight construction of security relevant parts the use of high-strength aluminium alloys plays an increasing role. Hence, in forming processes tools are subject to severe stress. Especially...
Vortr.: Firma Bürkert, Ingelfingen, 11.Februar 2009
Analysis of the flow in the upper mixing chamber of a three pass core. (2009)
Wank, A., Schulenberg, T., Laurien, E.
4th Internat.Symp.on Supercritical Water-Cooled Reactors, Heidelberg, March 8- 11, 2009
Transient stress analysis of the HPLWR pressure vessel. (2009)
Reiss, T., Foulon, H., Wank, A., Schulenberg, T.
4th Internat.Symp.on Supercritical Water-Cooled Reactors, Heidelberg, March 8- 11, 2009
Schichtentwicklung für die schmiermittelfreie Umformung von hochfesten Aluminiumwerkstoffen (2008)
Wielage, B., Wank, A., Rupprecht, C., Schmidt, G., Stark, S.
Many applications in light weight construction require massive formed high strength aluminium parts. For economical and ecological reasons the use of lubricants for massive forming has to be avoided....
Coolant mixing in the plenum of the HPLWR three pass core. (2008)
Wank, A., Schulenberg, T., Class, A.G.
Proc.of the 2008 Internat.Congress on Advances in Nuclear Power Plants, Anaheim, Calif., June 8-12, 2008
Coolant mixing in the HPLWR upper plenum. (2008)
Wank, A., Schulenberg, T., Class, A.G.
Jahrestagung Kerntechnik 2008, Hamburg, 27.-29.Mai 2008
CFD analysis of feedwater flow in the HPLWR pressure vessel. (2008)
Foulon, H., Wank, A., Schulenberg, T.
Internat.Students Workshop on High Performance Light Water Reactors, Karlsruhe, March 31 - April 3, 2008
Analysis of coolant mixing in the steam plenum. (2008)
Wank, A., Class, A.G., Schulenberg, T.
Internat.Students Workshop on High Performance Light Water Reactors, Karlsruhe, March 31 - April 3, 2008
Coolant mixing in the HPLWR upper plenum. (2008)
Wank, A., Schulenberg, T., Class, A.G.
ATW - International Journal for Nuclear Power, 53(2008) S.549-51
Thermisches Spritzen neuartiger SiC und TiC Pulver mit oxidischer Binderphase (2007)
Wielage, B., Grund, T., Nebelung, M., Thiele, S., Wank, A.
Intermediate results of an actual project are presented. The investigations concern newly developed SiC and TiC powders, their processing by means of thermal spraying and the characterization of...
Leopold, J., Wank, A., Rupprecht, C., Schmidt, G., Stark, S., Hoyer, K.
In the collaborate research centre 692 "high-tensile Al-based light constructional materials for security-related applications", funded by the German Research Foundation (DFG), new materials are...
Simulation of nanoidentation and penetration tests for coating-substrate-characterisation (2007)
Leopold, J., Schmidt, G., Stark, S., Wielage, B., Wank, A., Rupprecht, C., ...
The paper deals with the finite element simulation of coating subatrate systems and with test methods to determine matarial parameters like Young´s modulus of thin coatings. Two variants of...
Wielage, B., Grund, T., Nebelung, M., Thiele, S., Wank, A., Schwenk, A.
The combination of excellent mechanical, thermal and chemical properties of silicon carbide (SiC) ant titanium carbide (TiC) has made these materials very attractive both for structural ceramics...
Schwenk, A., Wank, A., Bobzin, K., Ernst, F., Schmitt, R., Dören, J., ...
Der Prozess des thermischen Beschichtens ist für die spätere Produktqualität enorm wichtig. Die Prüfung auf Fehler der Schichten kann oftmals nur mit Hilfe einer zerstörenden Materialprüfung...
New methods of surface engineering in forming tools development (2006)
Leopold, J., Schmidt, G., Beier, D., Stark, S., Wank, A., Rupprecht, C.
Due to high thermal and mechanical loads for high security-related aluminium parts new coatings must be developed for forming tools. In the paper some FEA models are presented to simulate the...
Thermisches Spritzen neuartiger SiC und TiC Pulver mit oxidischer Binderphase (2006)
Wielage, B., Grund, T., Nebelung, M., Thiele, S., Wank, A.
Es werden erste Zwischenergebnisse eines aktuellen Forschungsprojekts vorgestellt. Ziel diese Forschungsvorhabens ist die Herstellung und Charakterisierung thermisch gespritzter Schichten aus SiC und...