Selective Membrane Transport Systems studied by Solid-State NMR Spectroscopy (2009)
Membranes border cells from their environment. Thus, they belong to the basic prerequisites for life as we know it. Within cells, membranes are used to establish compartments dedicated to specific...
Comparative analysis of NMR chemical shift predictions for proteins in the solid phase. (2009)
Seidel, K., Etzkorn, M., Schneider, R., Ader, C., Baldus, M.
A structural link between inactivation and block of a K+ channel. (2008)
Ader, C., Schneider, R., Hornig, S., Velisetty, P., Wilson, E. M., Lange, A., ...
Solid-state NMR spectroscopy applied to a chimeric potassium channel in lipid bilayers. (2008)
Schneider, R., Ader, C., Lange, A., Giller, K., Hornig, S., Pongs, O., ...
A structural link between potassium channel gating and drug binding. (2008)
Pongs, O., Ader, C., Schneider, R., Hornig, S., Velisetty, P., Wilson, E. M., ...
Ader, C., Demmer, A., Deutges, D., Frank, J., Kammermeier, D., Klocke, F., ...
In order to achieve a sustainable competitive advantage for production facilities in high-wage countries, one must find ways of increasing the variability and individuality of products while at the...
Klocke, F., Quito, F., Arntz, K., Souza, A., Ader, C.
Single crystal (SX) nickel based superalloys have particular high temperature mechanical properties, oxidation and corrosion resistance. Therefore, these alloys are predestined for high temperature...
A structural link between potassium channel gating and drug binding. (2008)
Pongs, O., Ader, C., Schneider, R., Hornig, S., Velisetty, P., Wilson, E. M., ...
Investigations on laser sintering of ceramic slurries (2007)
Klocke, F., Derichs, C., Ader, C., Demmer, A.
For almost two decades, layer manufacturing techniques have assisted the product development at various stages from the operational point of view. Laser sintering is a powder-based layer...
Laser sintering of alumina slurries (2007)
Klocke, F., Derichs, C., Ader, C.
Since the middle of the 80s, layer manufacturing technologies have assisted the product development at various stages from the operational point of view. By now laser sintering is known as a...
Verwendung einer Keramiksuspension (2004)
DE 10217670 A UPAB: 20031223 NOVELTY - Ceramic suspension comprises a ceramic sol and a ceramic powder having a mixing ratio of 1-100 g, preferably 1-70 g, mixed in the sol. USE - Used in the...
Research on layer manufacturing techniques at Fraunhofer (2004)
Ader, C., Brosemer, M., Freyer, C., Fricke, H., Hennigs, D., Klocke, F., ...
Within the German Fraunhofer-Gesellschaft, the Fraunhofer Alliance Rapid Prototyping unites the competences of 12 institutes in the field of solid freeform fabrication. Covered competences are...
Direct laser sintering of ceramic materials (2003)
For more than one decade layer manufacturing technologies assist the development of new products. Due to a layer-wise build-up of a three-dimensional geometry, nearly every complex design is...
Direct laser sintering of ceramics (2003)
Due to a layer-wise build-up of a three-dimensional geometry, nearly every complex design is producible in a short period of time. Laser Sintering is a powder-based technique to produce plastic...
Development of an integrated model for selective laser sintering (2003)
Klocke, F., Wagner, C., Ader, C.
Complex physical processes with many single mechanisms, each affecting the other, can be investigated by creating submodels. Submodels enable a better understanding of partial aspects, because fuzzy...
Rapid Technologies - Der schnelle Weg zu Modellen, Prototypen und Werkzeugen (2003)
Der Modell-, Werkzeug- und Formenbau nimmt bei der Herstellung von Investitions- und Konsumgütern eine zentrale Stellung ein. Zunehmende Variantenvielfalt und Produktkomplexität sowie kürzere...
Direct laser sintering of ceramics (2002)
In the field of layer manufacturing technologies the Fraunhofer Institute of Production Technology IPT is involved in the development of the direct laser sintering of ceramic powders. Two different...
Direct laser sintering of ceramics (2002)
In the field of layer manufacturing technologies the Fraunhofer Institute of Production Technology IPT is involved in the development of the direct laser sintering of ceramic powders. Currently, two...
Selektives Lasersintern (2002)
Das Selektive Lasersintern (SLS) ist ein pulverbasiertes, schichtweise aufbauendes Fertigungsverfahren. Seit der Kommerzialisierung 1992 sind verschiedene Kunststoffe, Metalle und Sande verfügbar....
Datentechnik im Rapid Prototyping (2002)
Für aufbauende Fertigungsverfahren werden Schichtdaten des zu erzeugenden Produkts benötigt. Ausgehend von der Datenerzeugung mittels 3D-CAD-Systemen oder mittels Datenrückführung eines...
Direktes Lasersintern keramischer Fertigungskomponenten (2002)
Verschiedene Rapid Prototyping-Verfahren, wie z.B. Stereolithographie, Fused Deposition Modeling oder Kunststoff-Lasersintern, werden bereits seit vielen Jahren zur Herstellung von komplexen...
Im Rahmen der dritten Förderperiode des SFB 361 wurde im TP P4 vom Fraunhofer IPT ein Benchmark industriell kommerzialisierter Rapid-Verfahren für das Rapid Tooling durchgeführt. Untersuchte...