C. Sonsino

Verhalten von Stählen bei zyklischen Beanspruchungen (2006)

Sonsino, C.

Das Betriebsfestigkeitsverhalten von Bauteilen wird primär von der Bauteilgeometrie, d.h. von Kerben, dominiert. Gegen Schlagbeanspruchung kann im Vergleich zu Bauteilen aus zähen...

Structural durability of cast aluminium gearbox housings of underground railway vehicles under variable amplitude loading (2005)

Sonsino, C.

Present limitations in the assessment of components under multiaxial service loading (2005)

Sonsino, C., Zenner, H., Yousefi-Hashtyani, F., Küppers, M.

This paper is focused on a research project supported by the German automotive industry and international software producers. Six multiaxially loaded components were tested under random multiaxial...

"Dauerfestigkeit" - Eine Fiktion (2005)

Sonsino, C.

The decrease of fatigue strength under constant amplitude loading causes component failures also in the high-cycle regime (N > 10 6) after the knee point of the Woehler-curve. This fact is still not...

Structural durability proof of automotive aluminium safety components - present state of the art (2005)

Sonsino, C., Berg-Pollack, A., Grubisic, V.

Trends in increasing usage of aluminium-alloys for vehicle safety components require one to summarize the state of the art related to the approval of their service strength including the aspects of...

Fatigue design of PM-gears under consideration of herzian pressure with sliding and tooth bending (2005)

Sonsino, C., Lipp, K.

The paper gives an overview of the local stress design concept for gears related both to bending fatigue for the gear teeth and rolling contact fatigue on the gear flanks. Test results are presented...

Fahrwerksbauteile aus EN-GJS-400-15 und EN-GJS-800-8 (ADI) unter quasistatischen, schlagartigen und zyklischen Betriebsbelastungen (2005)

Sonsino, C., Heim, R., Hanselka, H., Zinke, R.

The basic suitability of nodular cast iron for safety-critical automotive components has been demonstrated by the fatigue testing of selected EN-GJS-400-15 and ADI components under variable...

Strucural durability of cast aluminium truck wheel under complex multiaxial service loading (2004)

Küppers, M., Sonsino, C., Fischer, G., Störzel, K.

Present limitations in the assessment of components under multiaxial service loading (2004)

Sonsino, C., Zenner, H., Yousefi-Hashtyani, F., Küppers, M.

Critical plane approach for the assessment of the fatigue behavior of welded aluminium under multiaxial spectrum loading (2004)

Küppers, M., Sonsino, C.

Warm powder compaction substitutes conventionally double pressed and double sintered synchroniser hubs (2004)

Sonsino, C., Ratzi, R.

Within a project supported by the European Union a consortium consisting of the companies Fraunhofer-Institute for Structural Durability LBF, AMES, Miba, GKN, Federal Mogul, Hoganas, RWTH Aachen,...

Einfluss der Betriebsbelastung auf die Lebensdauer (2004)

Sonsino, C.

Eine Methode zur Bewertung mehrachsiger Spannungzustände bei Aluminiumschweißverbindungen auf Basis der kritischen Schnittebene (2004)

Küppers, M., Sonsino, C.

Modern techniques for improving the fatigue behaviour of welded aluminium structures (2004)

Wohlfahrt, H., Nitschke-Pagel, T., Sonsino, C., Morgenstern, C.

Von der Simulation zum Bauteilverhalten am Beispiel eines PM-Zahnrades (2004)

Lipp, K., Sonsino, C., Kraft, T.

Ermittlung von Berechnungskennwerten für Karosseriestähle (2004)

Bleck, W., Engl, B., Sonsino, C.

Within the scope of a common research project of the steel and automotive industry, 20 sheet steels have been investigated to obtain input data for FEM-analysis. In detail, elastic, plastic and...

Bericht über die 30. Tagung des DVM-Arbeitskreises Betriebsfestigkeit (2004)

Sonsino, C.

Auswirkungen schweißbedingter Eigenspannungen auf das Schwingfestigkeitverhalten von Bauteilen unter variabler Betreibsspannung (2004)

Sonsino, C.

Betriebsfestigkeitsnachweis von Aluminiumsicherheitsbauteilen - Zum Stand der Technik (2004)

Sonsino, C., Berg-Pollack, A., Grubisic, V.

Anwendbarkeit von Festigkeitskonzepten für schwingbelastete geschweißte Bauteile (2004)

Kaßner, M., Sonsino, C.

Fatigue life assessment of welded joints under variable amplitude loading. State of the present knowledge and recommendations for fatigue design regulations (2004)

Sonsino, C., Maddox, S.J., Hobbacher, A.

Investigations of cumulative damage were carried out on two types of welded joints (butt welds and transverse stiffeners) of four structural steels, S355M, S690Q and S960Q in the thickness of t = 10...

Structural durability of cast aluminium gearbox housings of underground railway vehicles under variable amplitude loading (2003)

Sonsino, C.