Multimodal User Support in IPS² Business Model (2009)
Gegusch, R., Geisert, C., Hoege, B., Stelzer, C., Roetting, M., Seliger, G., ...
Organised by: Cranfield University
Informationssystemische Prozessorganisation mit sozioorientierter Transformation (2007)
Mit der Dissertationsschrift wird die ganzheitliche Synthese von prozessorientierter Unternehmensorganisation, informationstechnischen Potenzialen und Werkzeugen sowie der am Menschen orientierten...
Sustainability of the vault-structuring process (2006)
Pech, M., Weinert, N., Karabet, A., Viehweger, B., Seliger, G.
Tools and processes for hybrid disassembly of automotive engines (2006)
Harms, R., Sönnichsen, C., Friedrich, T., Seliger, G., Uhlmann, E.
A global collaboration to teach global product development: Faculty perspectives (2006)
Kim, J., Kim, D., Consiglio, S., Severengiz, S., Seliger, G., Patil, L., ...
Life-cycle information units for monitoring and identification of product use conditions (2004)
Middendorf, A., Buchholz, A., Hefer, J., Reichl, H., Schrank, K., Seliger, G.
A data structure concept for data monitoring systems (2004)
Kaebernick, H., Kara, S., Mueller, K., Seliger, G., Keil, T.
Increased reliability through assessment of standard components with life cycle units (2004)
Buchholz, A., Middendorf, A., Priyadip, R., Reichl, H., Seliger, G.
Integrated Development of Assembly and Disassembly (1999)
Westkämper, E., Feldmann, K., Reinhart, G., Seliger, G.
Manufacturers are becoming responsible for the complete life cycle of products. As a consequence they have to industrialize the after sales operations and the deproduction of products at the end of...
Information management for life cycle assessment using smart agents (1998)
Seliger, G., Keil, T., Krützfeldt, D., Müller, K., Perlewitz, H.
Systematische Bewertung von F&E-Projekten (1996)
Mit dem Ziel eines effizienten F&E-Managements wurde untersucht, welcher Hilfsmittel sich kleine und mittlere Unternehmen bedienen können, um aus einer Vielzahl von möglichen Projektideen die...
Selection of measuring points and optimization algorithm for automotive door fitting (1996)
The pose uncertainty of the door rleative to the poly-in white robotized assembly can be tackled with a differential adjusting motion of the robot to keep the clearance between them close to the...
On the optimization of automobile panel fitting (1996)
The difference between the sum of squared deviations and the maximum deviation was studied. The popular least square method refers to the former, but the criterion of many engineering geometrical...
New light-soldering-system integrates the assembly and soldering of SMD-components (1996)
Trotz intensiver Rationalisierungsbemühungen werden bei der Elektronikfertigung einige Lötstellen manuell gelötet, weil sie sich mit den herkömmlichen Massenlötverfahren nicht herstellen lassen....
Modelling of geometry-independent endeffectors for flexible disassembly tools (1996)
The indentation of solids in an object's surface creates new acting surface which can be used to transmit forces for handling, loosening and fixing operations. A verified mathematical description of...
Der Erfolg eines Unternehmens wird durch seine Fähigkeit bestimmt, sich veränderten Marktanforderungen anpassen zu können. Diese Fähigkeit kommt sowohl durch Qualität und Preis des Produktes,...
Fuzzy Clusterbildung von Altprodukten zur Planung und Steuerung von Demontagesystemen (1996)
Demontage ist unverzichtbarer Bestandteil des Recyclings gebrauchter technischer Produkte, da gegenüber dem Shreddern eine Vermischung von Werkstoffen vermieden wird und Bauteile sowie Baugruppen...
Disassembly factories for recovery of resources in product and material cycles (1996)
Seliger, G., Hentschel, C., Wagner, M.
The worldwide increase of waste and restricted resources require the recycling of worn-out products. Disassembly of complex consumer products offers advantages to other recycling technologies, like...
Berechnung des Verformungsverhaltens von Elastomerprofilen (1996)
Elastomerprofile finden aufgrund ihrer günstigen Eigenschaften in vielen Bereichen Verwendung. Eine genaue Berechnung des Verformungsverhaltens zur Bauteildimensionierung ist schwierig, da...
Automated sewing of textiles with different contours (1996)
To achieve a three-dimensional form of clothing a sophisticated joining of pieces of fabrics is required. Different lengths and contours have to be fit. A planning system has been realised to achieve...
Automated assembly of fabrics with different contours (1996)
Seliger, G., Gottschalk, T., Stephan, J.
To achieve a three-dimensional form of clothing a sophisticated joining of pieces of fabrics is required. Different lengths and contours have to be fit. A planning system has been realised to achieve...
Approach for the use of climbing robots in shipbuilding (1996)
Seliger, G., Mulhäuser, R., Müller, H.
To increase produktivity and quantity in the highly competitive, the modernisation of manufacturing processes is a important requirement. At present, assembly, inspection or maintenance tasks are...
Wirtschaftliches Recycling von Bildröhren durch Demontage (1995)
Seliger, G., Schmidtmann, R., Hentschel, C.
Disassembly of technical consumer products is one prereuisite for using parts, subassemblies, and materials in cycles. Disassembly process characteristics differ highly from those of assembly...
Verkehrstechnik - Impulse für die Produktion der Zukunft (1995)
Nie ist die Fortbewegung so einfach gewesen wie heute. Flugzeuge, Schiffe, Hochgeschwindigkeitszüge und nicht zuletzt das Auto rücken in erreichbare Nähe. Aber weil immer mehr Menschen diese...
Systematic integration of design-for- recycling into product design (1995)
Kriwet, A., Zussmann, E., Seliger, G.
This paper presents an approach for incorporating recycling considerations into product design. The approach regards the recycling aspects of product design, different recycling processes and the...
Prototyp eines mobilen Kleinroboters zum Schweißen von Großbauteilen aus Stahl (1995)
Schweißrobotersysteme - meist in aufwendiger Portalbauweise- wurden bereits in Schiffswerften, vor allem in Japan, eingesetzt. Doch erwiesen sie sich in vielen Fällen als unwirtschaftlich,...
A process model for elastomer-metal-pressfits (1995)
This paper descibes an analytical and numerical process model for elastomer-metal-pressfits. Based on the mathematical description of the fitting process, methods and experiments to identify the...
Optimization of multiple panel fitting in automobile assembly (1995)
Khorzad, D., Shi, J., Hu, S.J., Ni, J., Zussmann, E., Seliger, G.
A systematic approach is presented to obtain improved panel fit quality through the use of an optimum panel fitting strategy. The objective of the optimal panel fitting strategy is to determine the...
Montage - Orientierungsfeld betrieblicher Optimierung (1995)
Bei der Optimierung der betrieblichen Funktionen bietet die Montage ein wertvolles Orientierungsfeld. Beim Zusammenbau der Erzeugnisse erweist sich die Leistungsfähigkeit der innerbetrieblichen...
Gruppenarbeit in segmentierten Unternehmensstrukturen (1995)
In terms of a future-oriented working approach to a successful restructurization of different production areas, teamwork is an essential component of business management and staff development. The...
Grouping of used products for cellular recycling systems (1995)
Hentschel, C., Seliger, G., Zussmann, E.
This paper presents an approach to recycling system planning for used products at their end-of-life phase. We focused on the design of cellular recycling systems by using group technology. Current...
Flexible and safe automation with gripping interfaces (1995)
Gripping interfaces are solids which are attached to objects to provide standardized gripping surfaces for manipulation. Gripping interfaces considerably reduce flexibility requirements for the...
Demontagewerkzeuge schaffen Zeit- und Kostenvorteile (1995)
Produktvielfalt und nutzungsbedingte Veränderungen von Altgütern stellen hohe Flexibilitätsanforderungen an Demontagewerkzeuge. Durch neue Demontagewerkzeuge, die z. B. unempfindlich gegen...
Automated learning system for control and supervision of assembly systems (1995)
Automation has not been applied as widely in assembly as in other manufacturing areas, mainly due to the complexity of operations requiring control of many geometric and technological process...
Arbeit und Technik als Innovationspotential (1995)
Produktionstechnische Entwicklung vollzieht sich im Spannungsfeld zwischen den Funktionsanforderungen industriell betriebener Produktionsprozesse und den Gestaltungspotentialen sozialer und...
Zuführung von Kleinteilen in der Montage - Gurten und Magazieren für hohe Zuverlässigkeit (1994)
For placing small parts in readiness for assembly, about 80 percent of spiral vibration conveyors are used. For the greatest number of such parts, this is the most economical solution. This does not...
Verfahren zur Ermittlung und Verfolgung der Qualitätsfunktion durch Zustandsmodellierung (1994)
Seliger, G., Groth, A., Weber, H.
Während früher im wesentlichen "End-of-the-Pipe"-Lösungen der Qualitätssicherung angewendet wurden, die zu aufgeblähten Kontrollbereichen, intensiven Endprüfungen und hohen Fehlerkosten...
This paper describes an approach for planning the recycling process of discarded complex products. Recycling planning is defined as planning the recovery and treatment processes. The approach...
Programming and navigation of a mobile welding robot (1994)
Tis paper describes the programming and navigation features of the mobile climbing robot MoRoMAG which has been developed for welding of ship sections and large gas vessels. For seam tracking the...
Perspektiven der Unternehmensentwicklung eines mittelständischen Unternehmens in Meißen (1994)
Es wird auf die Situation und deren Auswirkung auf die Meißener Nachrichtentechnik GmbH eingegangen. Auf die wechselnden Anforderungen des Marktes antwortet die MNT GmbH mit Produkt-, Prozeß- und...
Schuler, H., Zussmann, E., Seliger, G.
This paper presents a planning approach for optimal fitting of objects based on range image data of a laser scanner (triangulationbased). The approach includes two steps: local and global fitting....
Neues Greifelement erleichtert die Automatisierung im Weltraum (1994)
Seliger, G., Thom, H., Wagner, M.
The great varity of experiments in automated space laboratories sets high flexibility requirements to handling devices. Thus, all handling objects are equipped with standardized gripping elements,...
Navigation and control of a mobile climbing robot for shipyards (1994)
This paper describes the navigation and control features of the mobile climbing robot MoRoMAG which has been developed for welding, gas cutting and other manufacturing processes on shipyards....
Leichtbautechniken für Gelenkarmroboter (1994)
Seliger, G., Schröter, W., Andreev, A.
The aim of the work introduced here is to improve robots with articulated arms with regard to their specific parameters, by means of lightweight construction types and by using fibre composite...
Integration of recycling considerations into product design - a system approach (1994)
Seliger, G., Zussmann, E., Kriwet, A.
This paper presents an integrative approach for design-for-recycling of products. A system approach is suggested integrating the products recycling feautres, the recycling process and the product...
A flexible laser scanner system for on-line process monitoring (1994)
This paper describes a geometrical sensor system for on-line process monitoring. The sensor consists of a double ligth stripe laser scanner and a modular software for sensor data processing which...
Fabrikinnovation durch Technologietransfer (1994)
Seliger, G., Furgac, I., Hentschel, C.
A medium sized information technology and communications company was given the opportunity of a completely new start on a new site. The company carried out a thorough innovation of products,...
Seliger, G., Voit, L., Schuler, H.
In this paper, we describe a new geometry measurement system with a robot guided laser scanner which is capable to handle new applications by its recognition and configuration flexiblity. By the use...
Disassembly process planning to support the recyclability of used technical products (1994)
Due to its complexity, amount and variety, scrap from used complex products constitutes a major recycling problem in the industrialised countries. Advanced recycling technologies currently exist only...
Disassembly oriented assessment methodology to support design for recycling (1994)
Seliger, G., Kriwet, A., Zussmann, E.
This paper describes an assessment methodology to support product design for "end-of-life" phase. It is based on the assessment of feasible options for disassembling a product and applying recycling...
Computer-aided planning system for multiple laser-scanner applications (1994)
Laser scanners are efficient tools for on-line inspection of workpiece dimensions and for closed-loop process control.Relevant industrial applications require frequently multiple scanners to acquire...
Seliger, G., Zussmann, E., Schuler, H.
This paper presents a planning approach or automatically synthesis of the viewpoint locations of a laser scanner that satisfy the detectability constaints of the geometrical feature of a given...
Überprüfung und Zulassung eines GFK-Tanks unter Nutzung der Methode der Finiten Elemente (1993)
Glass fibre reinforced (GRP) storage tanks for liquids have been successfully used in the storage and transport of chemicals for many decades. The fibre composite technology transfer project entitled...
Simulationsunterstützte Planung von Gruppenarbeit in der Montage (1993)
Seliger, G., Feige, M., Wang, Y.
In the assembly changes are necessary in the fields of flexible automation and the extension of conventional forms of organization. The introduction of teamwork belongs to the most important...
Simulation von Gruppenarbeit in der Montage (1993)
Seliger, G., Wang, Y., Feige, M.
Die flexible Automatisierung in der Montage, einhergebend mit der Erweiterung herkömmlicher Organisationsformen, hat sich erst vereinzelt durchgesetzt. Die Einführung von Gruppenarbeit zählt zu...
Robotergeführte Demontage und Montage von Kleingetrieben für die Austauschfertigung (1993)
Legal impositions on the recovery of technical goods are increasing the pressure for innovative manufacturem to conceive products and processes with regard to pair, or conversion presuppose a non-...
The impact that the services offered by the Demonstration Centre in Berlin have had on small and medium-sized companies is to be summed up. The yardstick to be applied is project-based cooperation...
Neuartige Bauweisen für Gelenkarmroboter (1993)
In production engineering, use is made of robots in order to ensure that the product quality can be maintained at a high level, the cycle times shortened and, as a result, the costs kept down. The...
Kraftgeregeltes Pressen mit Industrieroboter (1993)
The planning of automated assembly processes can be made more effective by using process models. An approach for an analytic process model for force- guided pressing of elastic materials is presented...
Seliger, G., Pingel, D., Holstein, W.
Complex components that incorporate local fibre reinforcement, inserts and force-application components have so far been produced primarily by the hand lay-up process. This process employs low-cost...
Knowledge-based integration of design and assembly process planning (1993)
Concurrent engineering is an approach for fast product development. To support concurrent product design and process planning effective tools are needed. This paper desribes the development of a...
Endeffektor zum robotergeführten Haftkleben (1993)
Seliger, G., Gutsche, C., Groth, A.
Gluing counts among those innovative joining techniques which are gaining ground in the series production of industrial products. Adhesive gluing has been largely bypassed by this development,...
Design for disassembly in the framework of life-cycle-design (1993)
Seliger, G., Hentschel, C., Kriwet, A.
Recycling technical consumer products after usage is a subject of rising importance. The lack of natural ressources, the necessity to save energy and the reduced permission for landfill areas or...
Die Demontage erlaubt im Vergleich zu konkurrierenden Recyclingprozessen einen höheren Werterhalt des Altgutes, erfordert aber auch einen höheren Aufwand. Durch demontagegerechte Produktgestaltung...
Business potential of technology in central and eastern Europe (1993)
Technology acts as a powerful driver for entrepreneurial activities. Basic technological innovations have to be transformed into competitive products to achieve business success. In this sense...
Automatisiertes Längspressen von Gummi-Metall-Verbindungen (1993)
Seliger, G., Gutsche, C., Neu, S.
For the longitudinal pressing of rubber-to-metal compounds no research has been carried out so far which would permit to make statements on the configuration of components to be joined, the behavior...
Automatisierte Handhabung technischer Textilien (1993)
Seliger, G., Gutsche, C., Gottschalk, T.
Technical textiles are being applied increasingly in cars, in the production of components form fibre- compund plastics, in environmental rotection or in airplanes. Frequent assembly tasks of...
Vorgehensweise bei der Strukturierung flexibler Montagesysteme unter CIM-Aspekten (1992)
Die erfolgreiche Planung und Einführung der Informationstechnik in einem Unternehmen ist von einer Vielzahl von Faktoren abhängig. Eine systematische Analyse des Zustands der Montage ist dabei...
Schrittweise Automatisierung durch hybride Montagesysteme (1992)
Due to the international competition, a company from Berlin was confronted with the necessity of putting new products on the market in a shorter time. In order to realize the productivity potential...
Montageprogramme mit Datenbank und Sensorunterstützung erstellen (1992)
The generation of robot programs for the automated assembly can be supported with planning information from data bases. Robot coordinates created by off-line programming cannot be applied without...
Globale ökologische Probleme und technische und ökonomische und soziale Strukturwandlungen werden mittel- und langfristik die Entwicklungschancen von Regionen verändern. Gerade bisher periphere...
Sensor-aided programming and movement. Adaptation for robot-guided deburring of castings (1991)
Automatically identifying burrs and planning robot trajectories for respective castings, geometrical and technological adaptation parallel to the process are tasks to be solved for flexible deburring...
Realisierung eines mobilen Kleinrobotersystems zum Schweißen von Schiffssektionen (1991)
In the preassambly of ship sections manual welding operations take up over 50% of the total working hours. Therefore exists a high demand to decrease production costs in this area, which is...
Produktionsmanagement und Controlling (1991)
Als produktionstechnische Erfolgseinheiten erweisen sich Produkt- und Prozeßinnovation. Auf dem Weg zu höherem Kundennutzen erweist sich die Montage als ein wesentlicher Orientierungspfad....
Produktionsmanagement in den neuen Bundesländern (1991)
The current economical situation in eastern Germany is characterized by massive restructuring processes. The privatisation of the formerly state-owned enterprises is well under way, 4000 enterprises...
Der Beitrag beschreibt die Planung eines Montagesystems für einen mittelständischen Hersteller von Meßgeräten. Das System ist zur flexiblen Leiterplattenbestückung mit SMD-Bauelementen für ein...
Industrierobotergeführte Montage flächiger nicht formstabiler Fügepartner (1991)
With the growing use of new materials such as technical textiles, handling and joining of non-rigid sheet components become increasingly important. In order to automate these processes, one has to...
Sensoren gewinnen beim Robotereinsatz in modernen Produktionssystemen an Bedeutung, ein Beispiel dafür ist das robotergeführte Entgraten von Gußteilen. Der Grat des zu bearbeitenden Werkstückes...
The future of automation (1991)
Barbey, J., Feige, M., Seliger, G.
Even if economic advantages of new developments in robot technology are not quite evident further development in robotic technology means a permanent powerful innovative force in production...
Automatisierungspotentiale flexibler Montageanlagen (1991)
Gleue, V., Seliger, G., Wang, Y.
Hohe technische, betriebliche und ökonomische Anforderungen stellen Planer und Betreiber moderner Montagesysteme vor anspruchsvolle und komplexe konstruktive, planerische und operative Aufgaben. Es...
Trends of handling automation in production (1990)
Krüger, S., Feige, M., Seliger, G.
Advanced production systems are characterized by an increasing degree of manufacturing and assembly automation. The robot technology is of special importance for the automation of manufacturing...
Produktionsmanagement - Vermittlung zwischen Technik und Arbeit (1990)
Produktionsmanagement vollzieht sich im Spannungsfeld zwischen den Funktionsanforderungen industriell betriebener Produktionsprozesse und den Gestaltungspotentialen sozialer und technologischer...
Montagetechnik - Schwerpunkt produktionstechnischer Unternehmensstrategie (1990)
Die eingesetzte Montagetechnik spielt für ein Unternehmen eine wesentliche strategische Rolle. Der Autor zeigt die strategischen Erfolgspotentiale innovativer montagetechnischer Entwicklungen auf...
Montagetechnik - Schwerpunkt produktionstechnischer Unternehmensstrategie (1990)
Die eingesetzte Montagetechnik spielt für ein Unternehmen eine wesentliche strategische Rolle. Der Autor zeigt die strategischen Erfolgspotentiale innovativer montagetechnischer Entwicklungen auf...
Montageautomatisierung "Montageabläufe realitätsnah simuliert" (1990)
Die eingesetzte Montagetechnik spielt für ein Unternehmen eine wesentliche strategische Rolle. Der Autor zeigt die strategischen Erfolgspotentiale innovativer montagetechnischer Entwicklungen auf...
Montieren. Gesamtheit aller Vorgänge, die dem Zusammenbau von geometrisch bestimmten Körpern dienen. Dabei kann zusätzlich formloser Stoff zur Anwendung kommen (1-3). Als Hauptfunktion der Montage...
Fabrikanlagen und Materialfluß. Zylinderrollenlager sensorgestützt montieren (1990)
Am Beispiel der robotergeführten Montage von Zylinderrollenlagern wird die Automatisierung von Fügeverrichtungen mit engtolerierten Fügepartnern demonstriert. Durch optische Sensoren zur...
Montieren. Gesamtheit aller Vorgänge, die dem Zusammenbau von geometrisch bestimmten Körpern dienen. Dabei kann zusätzlich formloser Stoff zur Anwendung kommen (1 - 3). Als Hauptfunktion der...
Wissensbasierte Diagnose in der Montage. Rechnerunterstützung bei Diagnose und Schulung (1989)
Baur, P., Bollmann, O., Kaase, W., Seliger, G.
Der Aufwand, Fehlerursachen an automatisierten Montageanlagen zu ermitteln, steigt in dem Maße, wie Symptome und Ursachen durch ausgedehnte und verzweigte Kausalnetze miteinander verbunden sind....
Strategien zur flexiblen Montageautomatisierung (1989)
Aufgrund tiefgreifender struktureller Veränderungen der industriellen Produktion erweitert sich der produktionstechnische Beitrag zur unternehmerischen Strategie. Auf dem Weg, den Kundennutzen von...
Simulation in der Arbeitsplanung (1989)
Die vielfältigen Aufgaben der Arbeitsplanung bieten ein breites Anwendungsfeld für die Simulation. Vor dem Hintergrund wachsender Zeitrestiktionen und steigender Investitionsrisiken bei der Planung...
Sensor-guided fettling with robots (1989)
Automation of fettling requires in most cases the compensation of tolerances. Tolerances of castings, which are too large to be compensated by passive compliance, must be compensated by means of...
Schnittstellen der Auftragsabwicklung. Kap.4 (1989)
Gallasch, W., Süssenguth, W., Venitz, U., Gimpel, B., Jochem, R., Mertins, K., ...
Produktionstechnische Kooperation in der EG, Fallbeispiel mit einem griechischen Systemhaus (1989)
An der Schnittstelle zu Entwicklung und Vertrieb wird die Montage als letzte Stufe des Herstellungsprozesses zum logistischen Orientierungspunkt des Fabrikbetriebes. In der Montage erfolgt eine...
Montagetechnik als Schwerpunkt produktionstechnischer Unternehmensstrategien (1989)
An der Schnittstelle zu Entwicklung und Vertrieb wird die Montage als letzte Stufe des Herstellungsprozesses zum logistischen Orientierungspunkt des Fabrikbetriebes. In der Montage erfolgt eine...
Mobile Roboter zum Schweißen von Großteilen (1989)
Schweißroboter im Bereich der Großteilmontage wurden bisher überwiegend als werkstückübergreifende Portal- oder Gantrysysteme realisiert. Eine Alternative und Ergänzung können kleine, mobile...
Entwicklungspfade zur rechnergesteuerten Fertigung - Die Sicht zweier Ingenieure (1989)
Der Beitrag zeigt auf, daß Produktivitätserhöhung nicht mehr mit streng arbeitsteiligen Systemen, sondern durch Aufgabenintegration zu erreichen ist. Das Fabrikgeschehen wird ansatzweise in einem...
Entwicklung und Fertigung von Bauteilen aus Faserverbundkunststoff (1989)
Spur, G., Holstein, W., Byrne, G., Seliger, G.
Die Anwendung von Faserverbundkunststoffen (FVK) im Maschinenbau ist wegen hoher Herstellungskosten und ungenügender Prozeß- und Werkstoffkenntnisse der Anwender noch sehr begrenzt. Es ergibt sich...
Computer aided planning of assembly systems (1989)
Krüger, S., Gleue, V., Seliger, G.
The integrated computer aided planning system is developed for assembly systems with special reference to automated material handling. Based on the specification of planning tasks, assembly functions...
CIM - Eine Herausforderung für die Hochschule (1989)
Die Produktionstechnische Entwicklung vollzieht sich im Spannungsfeld zwischen den Funktionsanforderungen industriell betriebener Produktionsprozesse und den Gestaltungspotentialen sozialer und...
Automated path generation for sensor-guided deburring (1989)
This paper discusses the application of sensors to automatically identify the burrs on castings and to plan the robot trajectories for cutting operations. Alternative methods to sensor approach are...
Entwicklung eines Hochgeschwindigkeitsmontageroboters mit stationären pneumatischen Antrieben (1988)
Rüstfreie Montage von elektronischen Baugruppen (1987)
Hetmanczyk, A., Fischer, D., Ludewig, T., Seliger, G., Spur, G.
Planung, Einfuehrung und Steuerung eines Fertigungssystems der mittleren Technologie. (1984)
Spur, G., Seliger, G., Mertins, K., Ganiyusufoglu, Oe.S., Eggers, A.
KfK-PFT 75 (Dezember 83)
Planung, Einfuehrung und Steuerung eines Fertigungssystems der mittleren Technologie (1983)
Spur, G., Seliger, G., Mertins, K., Eggers, A., Ganiyusufoglu, O.S.
Planung, Einfuehrung und Steuerung eines Fertigungssystems der mittleren Technologie. (1983)
Spur, G., Seliger, G., Mertins, K., Ganiyusufoglu, Oe.S., Eggers, A.
KfK-PFT 75 (Dezember 83)
Spur, G., Albrecht, R., Armbruster, N., Badur, K., Goehren, H., Junike, W., ...
KfK-PDV 195 (August 80)
Grundlagen der Prozessautomatisierung fuer die Fertigung. (1976)
Spur, G., Adam, W., Mattle, H.P., Paetzold, A., Prehn, W., Rittinghausen, H., ...
KFK-PDV 86 (August 76)