Scientific Commons: J. Linke

Effects of Short Pulse High Heat Fluxes on Carbon Base Plasma Facing Materials for ITER. (9999)

VAN DER Laan, J. G., Klippel, H. Th., Kraaij, G. J., Linke, J.

New experimental results from disruption heat flux simulations in the millisecond range with laser and electron beams are discussed. For a number of graphites, boronated graphites and carbon fiber...

Failure modes of vacuum plasma spray tungsten coating created on carbon fibre composites under thermal loads (2009)

Hirai, T., Bekris, N., Coad, J. P., Grisolia, C., Linke, J., Maier, H., ...

Mechanical and thermo-physical characterization of three-directional carbon fiber composites for W7-X and ITER (2009)

Pintsuk, G., Compan, J., Koppitz, T., Linke, J., Peacock, A. T., Pitzer, D., ...

Residual stresses in tungsten under exposures with ITER ELM-like plasma loads. (2009)

Makhlai, V.A., Garkusha, I.E., Malykhin, S.V., Pugachov, A.T., Landman, I., Linke, J., ...

12th Internat.Workshop on Plasma-Facing Materials and Components for Fusion Applications, Jülich, May 11-14, 2009

Experimental study of PFCs erosion under ITER-like transient loads at plasma gun facility QSPA. (2009)

Klimov, N., Podkovyrov, V., Zhitlukhin, A., Kovalenko, D., Bazylev, B., Janeschitz, G., ...

Journal of Nuclear Materials, 390-391(2009) S.721-26

Experimental validation of 3D simulations of tungsten melt erosion under ITER-like transient loads. (2009)

Bazylev, B., Janeschitz, G., Landman, I., Loarte, A., Federici, G., Merola, M., ...

Journal of Nuclear Materials, 390-391(2009) S.810-13

Failure study of helium-cooled tungsten divertor components tested at DEMO relevant steady-state heat loads. (2009)

Ritz, G., Hirai, T., Norajitra, P., Reiser, J., Giniyatulin, R., Makhankov, A., ...

12th Internat.Workshop on Plasma-Facing Materials and Components for Fusion Applications, Jülich, May 11-14, 2009

Status of plasma facing materials for next step fusion devices. (2009)

Linke, J., Pintsuk, G., Prokhodtseva, A., Rödig, M., Garcia-Rosales, C., Centeno, A., ...

14th Internat.Conf.on Fusion Reactor Materials (ICFRM-14), Sapporo, J, September 7-12, 2009

A tritium diagnostic and trap for JUDITH - first results in disruption simulation experiments with neutron irradiated beryllium during cyclic electron beam testing (2008)

Schmidt, A., Uytdenhouwen, Inge, Kuhnlein, W., Roedig, M., Linke, J., Hirai, T., ...

In the present study, the effect of disruptions on beryllium has been studied. Disruptions are simulated in the electron beam facility JUDITH by high energetic pulses of up to 250 MJ/m2. Under these...

Thermal load testing of erosion-monitoring beryllium marker tile for the ITER-Like Wall Project at JET (2008)

Hirai, T., Linke, J., Rubel, M., Coad, J. P., Likonen, Jari, Lungu, C. P., ...

Fusion Engineering and Design Vol.83 Nr.7 - 9, 1072 - 1076

Post-examination of helium cooled tungsten modules exposed to cyclic thermal loads. (2008)

Ritz, G., Hirai, T., Linke, J., Norajitra, P., Giniyatulin, R.

Jahrestagung Kerntechnik 2008, Hamburg, 27.-29.Mai 2008

Simulations of material damage to divertor and first wall armour under ITER transient loads by modelling and experiments. (2008)

Bazylev, B., Janeschitz, G., Landman, I., Pestchanyi, S., Loarte, A., Federici, G., ...

22nd IAEA Fusion Energy Conf., Geneve, CH, October 13-18, 2008

Post-examination of helium-cooled tungsten components exposed to DEMO specific cyclic thermal loads. (2008)

Ritz, G., Hirai, T., Linke, J., Norajitra, P., Giniyatulin, R., Singheiser, L.

25th Symp.on Fusion Technology (SOFT 2008), Rostock, September 15-19, 2008

Experimental validation of 3D simulations of tungsten melt erosion under ITER-like transient loads. (2008)

Bazylev, B., Janeschitz, G., Landman, I., Loarte, A., Federici, G., Merola, M., ...

18th Internat.Symp.on Plasma Surface Interactions (PSI-18), Toledo, E, May 26- 30, 2008

Experimental study of PFCs erosion under ITER-like transient loads at plasma gun facility QSPA. (2008)

Klimov, N., Podkovyrov, V., Zhitlukhin, A., Kovalenko, D., Bazylev, B., Janeschitz, G., ...

18th Internat.Symp.on Plasma Surface Interactions (PSI-18), Toledo, E, May 26-30, 2008

Behaviour of melted tungsten plasma facing components under ITER-like transient heat loads: simulations and experiments. (2008)

Bazylev, B., Janeschitz, G., Landman, I., Pestchanyi, S., Loarte, A., Federici, G., ...

Fusion Engineering and Design, 83(2008) S.1077-81

Development and testing of a bulk tungsten tile for the JET divertor (2007)

Hirai, T., Bondarchuk, E., Borovkov, A.I., Koppitz, Th., Linke, J., Mertens, Ph., ...

The ITER-like wall project has been launched to design, manufacture and test all the necessary components in view of their installation in a dedicated shutdown 2008–09. One of the R&D activities in...

Development and testing of a bulk tungsten tile for the JET divertor (2007)

HIRAI, T, BONDARCHUK, E, BOROVKOV, AI, KOPPITZ, T, LINKE, J, MERTENS, P, ...

Influence of recrystallization on thermal shock resistance of various tungsten grades (2007)

Uytdenhouwen, Inge, DECRéTON, M, HIRAI, T, LINKE, J, PINTSUK, G, Van Oost, Guido

ITER transient consequences for material damage: modelling versus experiments. (2007)

Bazylev, B., Janeschitz, G., Landman, I., Pestchanyi, S., Loarte, A., Federici, G., ...

Physica Scripta, T128(2007) S.229-33

Damage to tungsten macro-brush targets under ELM-like heat loads. Experiments vs.numerical simulations. (2007)

Bazylev, B., Janeschitz, G., Landman, I., Pestchanyi, S., Loarte, A., Federici, G., ...

10th European Congress and Exhibition on Advanced Materials and Processes (Euromat 2007), Nürnberg, September 10-13, 2007

Damage to tungsten macro-brush targets under multiple ELM-like heat loads. Experiments vs.numerical simulations and extrapolation to ITER. (2007)

Bazylev, B., Janeschitz, G., Landman, I., Pestchanyi, S., Loarte, A., Federici, G., ...

8th Internat.Symp.on Fusion Nuclear Technology (ISFNT-8), Heidelberg, September 30 - October 5, 2007

Simulation of cracks in tungsten under ITER specific transient heat loads. (2007)

Pestchanyi, S., Linke, J.

Fusion Engineering and Design, 82(2007) S.1657-63

Effects of ELMs on ITER divertor armour materials. (2007)

Zhitlukhin, A., Klimov, N., Landman, I., Linke, J., Loarte, A., Merola, M., ...

Journal of Nuclear Materials, 362-365(2007) S.301-07

He-cooled divertor for Demo. Manufacture and high heat flux tests of W-based mock-ups. (2007)

Norajitra, P., Holstein, N., Krauss, W., Kruessmann, R., Messemer, G., Reiser, J., ...

13th Internat.Conf.on Fusion Reactor Materials (ICFRM-13), Nice, F, December 10- 14, 2007

ELMs and disruptions in ITER: Expected Energy Fluxes on Plasma Facing Components from Multi-machine Experimental Extrapolations and Consequences for ITER Operation (2006)

Loarte, A., Saibene, G., Sartori, R., Campbell, D., Riccardo, V., Andrew, P., ...

Influence of recrystallization on thermal shock resistance of various tungsten grades (2006)

Uytdenhouwen, Inge, DECRéTON, M, HIRAI, T, LINKE, J, PINSTUK, G, Van Oost, Guido

Multiple ELMs consequences for CFC and W macrobrush target damage in ITER. Numerical simulations vs. experiments. (2006)

Bazylev, B., Janeschitz, G., Landman, I., Federici, G., Loarte, A., Merola, M., ...

11th Internat.Conf.and School on Plasma Physics and Controlled Fusion, Alushta, UA, September 11-16, 2006

Erosion of CFC and W macrobrush target after multiple exposures related to ITER ELMs. Numerical simulations vs.experiments. (2006)

Bazylev, B., Janeschitz, G., Landman, I., Federici, G., Loarte, A., Merola, M., ...

33rd European Physical Society Conf.on Plasma Physics, Roma, I, June 19-23, 2006

Modelling of material damage of CFC and W macro-brush divertor targets under ELMs and disruptions at plasma gun facilities and prediction for ITER. (2006)

Bazylev, B., Janeschitz, G., Landman, I., Pestchanyi, S., Loarte, A., Federici, G., ...

21st IAEA Fusion Energy Conf., Chengdu, China, October 16-21, 2006

ITER transient consequences for material damage. Modelling vs.experiments. (2006)

Bazylev, B., Janeschitz, G., Landman, I., Pestchanyi, S., Loarte, A., Federici, G., ...

11th Internat.Workshop on Plasma-Facing Materials and Components for Fusion Applications, Greifswald, October 10-12, 2006

Thermo-stress analysis of actively cooled diagnostic windows for quasi-continuous operation of the W7-X stellarator (2005)

Ogorodnikova,O. V., König,R., Pospieszczyk,A., Schweer,B., Linke,J.

Thermo-stress analysis of actively cooled diagnostic windows for quasi-continuous operation of the W7-X stellarator (2005)

Ogorodnikova, O. V., König, R., Pospieszczyk, A., Schweer, B., Linke, J.

EU Development of High Heat Flux Components (2005)

Linke, J., Lorenzetto, P., Majerus, P., Merola, M., Pitzer, D., Rödig, M.

Thermal shock resistance of plasma facing materials under ITER relevant loading conditions (2005)

Uytdenhouwen, Inge, HIRAI, T, KUEHNLEIN, W, LINKE, J, SERGIENKO, G, Van Oost, Guido

Modelling of thermal shock experiments of carbon based materials in JUDITH. (2005)

Ogorodnikova, O.V., Pestchanyi, S., Koza, Y., Linke, J.

Journal of Nuclear Materials, 337-339(2005) S.791-94

Experimental assessment of the effects of ELMs and disruptions on ITER divertor armour materials. (2005)

Zhitlukhin, A., Federici, G., Giniyatulin, R., Landman, I., Linke, J., Loarte, A., ...

Fusion Energy 2004 : Proc.of an Internat.Conf., Vilamoura, P, November 1-6, 2004 Wien : IAEA, 2005

Modeling of tungsten erosion experiments in JUDITH. (2005)

Bazylev, B.N., Ogorodnikova, O.V., Linke, J.

European Congress on Advanced Materials and Processes (Euromat 2005), Praha, CZ, September 5-8, 2005

Materials for the plasma-facing components of fusion reactors (2004)

Bolt,H., Barabash,V., Krauss,W., Linke,J., Neu,R., Suzuki,S., ...

Energy threshold of brittle destruction for carbon based materials. (2004)

Bazylev, B.N., Koza, Y., Landman, I.S., Linke, J., Pestchanyi, S.E., Würz, H.

Materials for the plasma-facing components of fusion reactors (2004)

Bolt, H., Barabash, V., Krauss, W., Linke, J., Neu, R., Suzuki, S., ...

Performance of Plasma Facing Components under Intense Thermal Loads in Tokamaks and Stellarators (2004)

Linke, J., Hirai, T., Rödig, M., Singheiser, L.

Energy threshold of brittle destruction for carbon based materials. (2004)

Bazylev, B.N., Koza, Y., Landman, I.S., Linke, J., Pestchanyi, S.E., Würz, H.

Proc.of the 10th Carbon Workshop, Jülich, September 17-19, 2003

Materials for the plasma-facing components of fusion reactors. (2004)

Bolt, H., Barabash, V., Krauss, W., Linke, J., Neu, R., Suzuki, S., ...

11th Internat.Conf.on Fusion Reactor Materials (ICFRM-11), Kyoto, J, December 7-12, 2003

Brittle destruction of carbon based materials. (2004)

Koza, Y., Amouroux, S., Bazylev, B.N., Berthe, E., Kuehnlein, W., Linke, J., ...

Proc.of the 10th Carbon Workshop, Jülich, September 17-19, 2003

Modelling of thermal shock experiments of carbon based materials in JUDITH. (2004)

Ogorodnikova, O.V., Pestchanyi, S., Koza, Y., Linke, J.

16th Internat.Conf.on Plasma Surface Interactions in Controlled Fusion Devices, Portland, Maine, May 24-28, 2004

10th International Conference on Fusion Reactor Materials (2003)

Kleykamp, H, Linke, J, Lucas, G E, Singh, B N

Arcing at B4C-covered limiters exposed to a SOL-plasma (2003)

Laux,M., Schneider,W., Wienhold,P., Jüttner,B., Huber,A., Balden,M., ...

Plasma sprayed B4C-layers considered as wall coatings for the W7X stellarator have been studied during and after exposure to TEXTOR and after arcing experiments in vacuum. Arcing through the B₄C...

Arcing at B4C-covered limiters exposed to a SOL-plasma (2003)

Laux, M., Schneider, W., Wienhold, P., Jüttner, B., Huber, A., Balden, M., ...

Plasma sprayed B4C-layers considered as wall coatings for the W7X stellarator have been studied during and after exposure to TEXTOR and after arcing experiments in vacuum. Arcing through the B₄C...

Overview of JET results (2003)

Pamela, J., Solano, E. R., Adams, J. M., Agarici, G., Agarici, M., Akhter, H., ...

Scientific and technical activities on JET focus on the issues likely to affect the ITER design and operation. Our understanding of the ITER reference mode of operation, the ELMy H-mode, has...

Status of fabrication development for plasma facing components in the EU. (2003)

Daenner, W., Merola, M., Lorenzetto, P., Peacock, A., Bobin-Vastra, I., Briottet, L., ...

Proc.of the 6th Internat.Symp.on Fusion Nuclear Technology (ISFNT-6), San Diego, Calif., April 7-12, 2002

Fusion Reactor Materials X. Proceedings of the tenth international conference on fusion reactor materials (ICFRM-10). (2003)

Kleykamp, H., Linke, J., Lucas, G.E., Singh, B.N., [Hrsg.]

Journal of Nuclear Materials, 307-311(2002)

Plasma facing and high heat flux materials - needs for ITER and beyond (2002)

Bolt,H., Barabash,V., Federici,G., Linke,J., Loarte,A., Roth,J., ...

Plasma-facing materials (PFMs) have to withstand particle and heat loads from the plasma and neutron loads during reactor operation. For ITER knowledge has been accumulated by operation experience...

Development of tungsten coated first wall and high heat flux components for application in ASDEX Upgrade (2002)

Maier,H., Luthin,J., Balden,M., Lindig,S., Linke,J., Rohde,V., ...

In the tokamak experiment ASDEX Upgrade, the investigation of tungsten as a first wall material is an ongoing research project. In a step-by-step strategy, the tungsten covered surface area is...

Plasma facing and high heat flux materials - needs for ITER and beyond (2002)

Bolt, H., Barabash, V., Federici, G., Linke, J., Loarte, A., Roth, J., ...

Plasma-facing materials (PFMs) have to withstand particle and heat loads from the plasma and neutron loads during reactor operation. For ITER knowledge has been accumulated by operation experience...

Development of tungsten coated first wall and high heat flux components for application in ASDEX Upgrade (2002)

Maier, H., Luthin, J., Balden, M., Lindig, S., Linke, J., Rohde, V., ...

In the tokamak experiment ASDEX Upgrade, the investigation of tungsten as a first wall material is an ongoing research project. In a step-by-step strategy, the tungsten covered surface area is...

Dust characterization and analysis in Tore-Supra (2001)

Chappuis,P., Tsitrone,E., Mayne,M., Arnaud,X., Linke,J., Bolt,H., ...

Development of Thick B4C Coatings for the First Wall of W7-X (2001)

Kötterl,S., Bolt,H., Greuner,H., Huber,A., Linke,J., Mayer,M., ...

The Design of Actively Cooled Plasma-Facing Components (2001)

Scheerer,M., Bolt,H., Gervash,A., Linke,J., Smid,I.

Dust characterization and analysis in Tore-Supra (2001)

Chappuis, P., Tsitrone, E., Mayne, M., Arnaud, X., Linke, J., Bolt, H., ...

Development of Thick B4C Coatings for the First Wall of W7-X (2001)

Kötterl, S., Bolt, H., Greuner, H., Huber, A., Linke, J., Mayer, M., ...

The Design of Actively Cooled Plasma-Facing Components (2001)

Scheerer, M., Bolt, H., Gervash, A., Linke, J., Smid, I.