Design Criteria For High Intensity H (2007)
Injector Linacs Bongardt, K. Bongardt
INTRODUCTION All proposed pulsed spallation source projects consists of a -- linac, followed by one (or more) compressor rings or rapid cycling synchrotrons. In Fig. 1, as a typical example the...
Final Bunch Rotation And Momentum (2007)
Spread Limitation For, K. Bongardt
INTRODUCTION The most critical part of the accelerator of the European Spallation Source [1] is the loss free injection into the compressor rings. Due to the 5.1 MW average beam power at 1.334 GeV,...
Proposal for a 3 MeV H¯ test facility in the PS South Hall (2006)
Bongardt, K, Caspers, F, Garoby, R, Küchler, D, Lombardi, A M, Mostacci, A, ...
The Study of a European Neutrino Factory Complex (2003)
Gruber, P, Aleksa, Martin, Amand, J F, Autin, Bruno, Baldy, J L, Benedikt, Michael, ...
The Neutrino Factory is a new concept for an accelerator that produces a high-intensity, high-energy beam of electron and muon neutrinos - the ultimate tool for neutrino oscillation studies and the...
Progress in the Design of the SPL, an $H ^{-}$ High-Intensity Linac at CERN (2002)
Bongardt, K, Caspers, Friedhelm, Frischholz, Hans, Gerigk, F, Lombardi, A M, Losito, R, ...
The SPL (Superconducting Proton Linac) is a 4 MW 2.2 GeV H- linac, intended to re-use most of the 352 MHz RF equipment from the decommissioned LEP machine. Injecting into the CERN PS, this linac...
Progress in the Design of the SPL, an H- High-Intensity Linac at CERN (2002)
Bongardt, K, Caspers, F, Frischhols, H, Garoby, R, Gerigk, F, Lombardi, A M, ...
The SPL (Superconducting Proton Linac) is a 4 MW 2.2 GeV H- linac, intended to re-use most of the 352 MHz RF equipment from the decommissioned LEP machine. Injecting into the CERN PS, this linac...
The study of a European Neutrino Factory complex (2002)
Gruber, P, Aleksa, M, Amand, JF, Autin, B, Baldy, JL, Benedikt, M, ...
Proton Drivers for Neutrino Factories: The CERN Approach (2000)
Schönauer, Horst Otto, Autin, Bruno, Bongardt, K, Cappi, R, Chanel, M, Franchetti, Giuliano, ...
The paper describes the CERN approach for a proton driver for a Neutrino Factory. Two main layouts are presented: the so-called CERN Reference Scenario, based on a 2.2 GeV linac and an alternative...
High Current Beam Dynamics in an Ess SC Linac (2000)
Pabst, M., Bongardt, K., Letchford, A.
Three alternative designs of the European Spallation Source (ESS) high energy linac are described. The most promising ones are either a normalconducting (nc) coupled cavity linac (CCL) up tofinal...
Palmer, R, Autin, Bruno, Bongardt, K
Neutrino factories within the context of muon colliders. Technical challenge of neutrino factories. Very intense proton drivers.
Proton drivers for neutrino factories: The CERN approach (2000)
Schonauer, H, Autin, B, Cappi, R, Chanel, M, Franchetti, G, Gareyte, J, ...
Proton Drivers for Neutrino Factories: The CERN Approach (2000)
H. Schönauer, B. Autin, M. Chanel, G. Franchetti, J. Gareyte, R. Garoby, ...
This article concentrates on the accumulator and compressor rings of the CERN Reference Scenario; the SPL was presented at this Workshop by R. Garoby and is well-documented [1]. Only a section is...
The European spallation source study (1997)
Gardner, I S K, Lengeler, Herbert, Bongardt, K, Klein, H, Rees, G H, Warsop, C M
Status of the European spallation source design study (1997)
Gardner, I S K, Rees, G H, Warsop, C M, Lengeler, H, Bongardt, K, Klein, Horst
Critical beam dynamic issues in neutron spallation sources (1995)
Pabst, M, Bongardt, K, Letchford, A P
Proc 8th ICFA Advanced beam Dynamics Workshop, Bloomington, USA (1995)
Statistical treatment of misalignments in linear accelerators. (1982)
Jameson, R.A.; Taylor, L. S. [Hrsg.]