L. Salvo

Creep behaviour of replicated open-pore aluminium and aluminium alloy foams (2008)

Diologent, F., Soubielle, S., Mueller, R., Goodall, R., Salvo, L., Mortensen, A.

Aluminium (Al 99.99 % purity) and aluminium alloy Al-5.7Ni and Al-5Mg (wt.%) open-cell foams made by replication processing are creep-tested in the temperature range T/Tm=0.5-0.8, varying the...

QUICK-PLASTIC FORMING: SIMILARITIES AND DIFFERENCES WITH SUPER-PLASTIC FORMING (2008)

Boissiere, R., Terzi, S., Blandin, J.J., Salvo, L.

In order to extend the industrial use of SuperPlastic Forming (SPF), efforts have been devoted in the recent past to reduce forming times. The more spectacular result is probably the development of...

QUICK-PLASTIC FORMING: SIMILARITIES AND DIFFERENCES WITH SUPER-PLASTIC FORMING (2008)

Boissiere, R., Terzi, S., Blandin, J.J., Salvo, L.

In order to extend the industrial use of SuperPlastic Forming (SPF), efforts have been devoted in the recent past to reduce forming times. The more spectacular result is probably the development of...

Coordination measurements in compacted NaCl irregular powders using X-ray microtomography (2008)

Marmottant, A., Salvo, L., Martin, C. L., Mortensen, A.

X-ray microtomography and three-dimensional (3D) image analysis are used to quantify the structural evolution during cold isostatic compaction of two irregularly shaped NaCl powders having different...

Influence of density on the electrical behaviour of a steel metallic wool (2007)

MASSE , Jean-Philippe, F. Volp, L. Salvo, Y. Bréchet, O. Bouaziz, F. Pinard

Le but de ce papier est de présenter l'influence de la densité sur le comportement électrique d'une laine d'acier. Les courbes conductivité électrique – densité relative sont bien décrites...

Creep Behaviour of replicated aluminium foams: Comparison between model and experiment (2007)

Diologent, F., Soubielle, S., Mueller, R., Goodall, R., Salvo, L., Mortensen, A.

Uniaxial deformation of microcellular metals: model systems and simplified analysis (2007)

Goodall, R., Conde, Y., Mueller, R., Soubielle, S., Combaz, E., ...

Influence of the infiltration pressure on the structure and properties of replicated aluminium foams (2007)

Despois, J. F., Marmottant, A., Salvo, L., Mortensen, A.

Spherical pore replicated Microcellular Aluminium (2007)

R. Goodall, A. Marmottant, L. Salvo, A. Mortensen

Microstructural tailoring of open-pore microcellular aluminium by replication processing (2006)

Despois, J. F., Marmottant, A., Conde, Y., Goodall, R., Salvo, L., San Marchi, C., ...

The replication process is presented and discussed with emphasis on methods for microstructural tailoring of open-pore microcellular aluminium-based foams, highlighting methods it offers for control...

Replicated microcellular aluminium with spherical pores (2005)

Goodall, R., Marmottant, A., Despois, J. F., Salvo, L., Mortensen, A.

In-situ X-ray Tomography Investigation of Replicated Aluminium Foams: Quantitative Analysis of Location Using 3D Strain Mapping (2005)

Marmottant, A., Despois, J. F., Salvo, L., Maire, E., Bornert, M., Mortensen, A.

Caractérisation des Matériaux Cellulaires par Tomographie X: Etude des Liens Structure-propriétés dans les Mousses d'Aluminium à Porosité Ouverte, in Mécanismes et Mécanique des Matériaux et Structures à Longueur Interne: Comportement et Effets d'Echelle (2004)

Marmottant, A., Salvo, L., Maire, E., Mortensen, A., Despois, J. F., Conde, Y.

Computer simulation of the microstructure and rheology of semi-solid alloys under shear (2000)

Perez, M., Barbe, J-C., Neda, Z., Brechet, Y., Salvo, L.

The rheological behavior of metallic alloys containing both solid and liquid phases is investigated in the low solid fraction range (

Influence of Particle Oxidation on the Interfacial Structure of SiC Reinforced Al-1% Mg Alloys. (1998)

Legoux, J. G., L'Esperance, G., Salvo, L., Suery, M.

This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, dr mmc, experimental, mmc materials and material types:,...

Influence of Particle Oxidation on Age-Hardening Behaviour of as-Fabricated and Remelted SiC Reinforced Al-1 Percent Mg Alloys. (1998)

Salvo, L., Suery, M., Legoux, J. G., L'Esperance, G.

Age-hardening behavior of al-1%mg alloys reinforced with as received and oxidized particles is studied to evaluate the extent of interfacial reactions that take place during high temperature...

Effect of Reinforcement on Age Hardening of cast 6061 Al-SiC and 6061 Al-Al2O3 Particulate Composites. (1998)

Salvo, L., Suery, M.

The purpose of this paper is to study the age hardening behavior of 6061 al alloy reinforced with sic and al2o3 particles and to compare it with that of the unreinforced alloy. the materials were...

Interfacial Reactions and Age Hardening in Al-Mg-Si Metal Matrix Composites Reinforced With SiC Particles. (1998)

Salvo, L., L'Esperance, G., Suery, M., Legoux, J. G.

Al-si-mg matrix composites have been fabricated by the compocasting technique using as-received and oxidized particles. interfacial reactions occurring during fabrication and during subsequent...

Microstructural Characterization of the Interfacial Region in SiC Reinforced Al-Mg Alloys. (1998)

Legoux, J. G., Salvo, L., Ribes, H., L'Esperance, G., Suery, M.

This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, data, dr mmc, mmc, mmc data materials and material types:, al...

The Effect of Processing and Reinforcement Parameters on the Age-Hardening Response of Liquid-Processed 6061-Based Composites. (1998)

Towle, D., Salvo, L., Suery, M., Friend, C.

This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, cr mmc, cr mmc, data, dr mmc, experimental, mmc, mmc data...