EIGEN MODES OF OSCILLATION FOR TRAINS OF BUNCHES (2008)
M. Billing, Z. Greenwald, W. Hartung, W. R. Lou, M. Pisharody, J. Rogers, ...
Ring) has changed its mode of operation from 7 nearly equally spaced bunches in the two counter-rotating beams to 9 trains of 2 bunches in each of the beams as the next step in the upgrade of the...
Beam Test of a Superconducting Cavity for the CESR Luminosity Upgrade* (2008)
H. Padamsee, P. Barnes, S. Belomestnykh, K. Berkelman, M. Billing, R. Ehrlich, ...
The prototype superconducting cavity system for CESR-Phase III was tested in CESR in August 1994. The performance of the system was very gratifying. The cavity operated gradients of 4.5-6 MV/m and...
Beam Test of a Superconducting Cavity for the CESR Luminosity Upgrade (2007)
H. Padamsee, P. Barnes, S. Belomestnykh, K. Berkelman, M. Billing, R. Ehrlich, ...
The prototype superconducting cavity system for CESRPhase
EIGEN MODES OF OSCILLATION FOR TRAINS OF BUNCHES (2007)
M. Billing, Z. Greenwald, W. Hartung, W. R. Lou, M. Pisharody, J. Rogers, ...
Ring) has changed its mode of operation from 7 nearly equally spaced bunches in the two counter-rotating beams to 9 trains of 2 bunches in each of the beams as the next step in the upgrade of the...
CESR Feedback System Using a Constant Amplitude Pulser * (2007)
G. Codner, M. Billing, R. Meller, R. Patten, J. Rogers, J. Sikora, ...
Abstract. particle beam feedback system using constant-amplitude, 1000 V, 12 ns pulses has been built to provide longitudinal and horizontal feedback for stabilizing 14 ns spaced bunches for use in...
Measurements of Vacuum Chamber Impedance Effects (2007)
On The Stored, M. Billing, Z. Greenwald, W. Hartung, W. R. Lou, M. Pisharody, ...
T and modulated by the average position of the bunch times its current, d(t) = x 0 Q b e jw b t d(t + nT) where x 0 is the betatron oscillation amplitude at the angular frequency w b and Q b is the...
CESR Feedback System Using a Constant Amplitude Pulser (1998)
Codner Billing, G. Codner, M. Billing, R. Meller, R. Patten, J. Rogers, ...
nsients is approximately 1000 volts. For a system delivering a sinewave into a non-resonant kicker, a 10 kW amplifier would be required. The power available in the present system * This work was...
CESR Feedback System Using a Constant Amplitude Pulser * (1998)
G. Codner, M. Billing, R. Meller, R. Patten, J. Rogers, J. Sikora, ...
A particle beam feedback system using constant amplitude, 1000 volt, 12 nanosecond pulses has been built to provide longitudinal and horizontal feedback for stabilizing 14 nanosecond spaced bunches...
Beam Test of a Superconducting Cavity for the CESR Luminosity Upgrade *
Padamsee Barnes Belomestnykh, H. Padamsee, P. Barnes, S. Belomestnykh, K. Berkelman, M. Billing, ...
The prototype superconducting cavity system for CESRPhase III was tested in CESR in August 1994. The performance of the system was very gratifying. The cavity operated gradients of 4.5-6 MV/m and...