Ultrahigh strength single crystalline nanowhiskers grown by physical vapor deposition (2009)
Richter, G., Hillerich, K., Gianola, D.S., Mönig, R., Kraft, O., Volkert, C.
Härtelt, M., Riesch-Oppermann, H., Schalk, T., Kraft, O.
33rd Internat.Conf.and Exposition on Advanced Ceramics and Composites, Daytone Beach, Fla., January 18-23, 2009
Schwaiger, R., Reszat, J.T., Bade, K., Aktaa, J., Kraft, O.
International Journal of Materials Research, 100(2009) S.68-75
Choi, I.S., Schwaiger, R., Castrup, A., Ivanisenko, Y., Hahn, H., Kraft, O.
138th Annual Meeting and Exhibition of the Minerals, Metals and Materials Society (TMS 2009), San Francisco, Calif., February 15-19, 2009
Choi, I.S., Kraft, O., Schwaiger, R.
Journal of Materials Research, 24(2009) S.998-1006
Mechanische Charakterisierung und Beanspruchbarkeit dünner Schutzschichten. (2009)
Workshop 'Funktionale Schutzschichten', Dortmund, 3.-4.März 2009
Parameter identification for phase field models for ferroelectrics. (2009)
Völker, B., Kamlah, M., Kraft, O.
SPIE's 16th Annual Internat.Symp.on Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring, San Diego, Calif., March 8-12, 2009
Härtelt, M., Riesch-Oppermann, H., Kraft, O.
6th Internat.Conf.on Nitrides and Related Materials (ISNT), Karlsruhe, March 15-18, 2009
On the effect of Ag content on the deformation behavior of ultrafine-grained Pd-Ag alloys. (2009)
Choi, I.S., Schwaiger, R., Kurmanaeva, L., Kraft, O.
Scripta Materialia, 61(2009) S.64-67
Discrete dislocation dynamics study of the influence of boundary conditions in micro-samples. (2009)
Senger, J., Weygand, D., Kraft, O., Gumbsch, P.
Frühjahrstagung DPG, Fachverband Metall- und Materialphysik, Dresden, 22.-27.März 2009
Mechanical properties of nanocrystalline palladium prepared by magnetron sputtering. (2009)
Castrup, A., Scherer, T., Ivanisenko, Y., Hahn, H., Choi, I.S., Kraft, O.
Frühjahrstagung DPG, Fachverband Metall- und Materialphysik, Dresden, 22.- 27.März 2009
Bauteiloptimierung nach dem Vorbild der Natur. (2009)
Mattheck, C., Tesari, I., Kraft, O.
Bionik-Vorlesung, Universität Stuttgart, 4.Mai 2009
Design in der Natur. Optimale Faserverläufe um Perforationen mit der Methode der Zugdreiecke. (2009)
Mattheck, C., Bethge, K., Kraft, O., Moldenhauer, H.
Konstruktionspraxis, (2009) Nr.7 S.14-15
Melzer, B., Steinbrecher, T., Kraft, O., Schwaiger, R., Speck, T.
Kesel, A.B. [Hrsg.]
Die Methode der Zugdreiecke und optimale Faserverläufe nach CAIO. (2009)
Mattheck, C., Bethge, K., Kraft, O., Moldenhauer, H.
Poster im Internet (2009)
Spannungsspitzen an virtuellen Kerben. (2009)
Mattheck, C., Bethge, K., Sörensen, J., Tesari, I., Kraft, O.
Poster im Internet (2009)
Probabilistic lifetime prediction for ceramic components under static and cyclic loading. (2009)
Härtelt, M., Riesch-Oppermann, H., Kraft, O.
12th Internat.Conf.on Fracture (ICF12), Ottawa, CDN, July 12-17, 2009
Probabilistic analysis of strength and lifetime data. A Bayesian approach. (2009)
Riesch-Oppermann, H., Kraft, O.
12th Internat.Conf.on Fracture (ICF12), Ottawa, CDN, July 12-17, 2009
Spannungsabbau ohne Kerbformoptimierung. (2009)
Mattheck, C., Sörensen, J., Bethge, K., Tesari, I., Kraft, O.
Poster im Internet (2009)
Parameter identification for phase field modeling for ferroelectric materials. (2009)
Völker, B., Kamlah, M., Kraft, O.
ASME 2009 Conf.on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, Calif., September 21-23, 2009
Correlation between critical temperature and strength of small-sale bcc pillars (2009)
Schneider, A. S., Kaufmann, D., Clark, B. G., Frick, C. P., Gruber, P. A., Mönig, R., ...
Die Prozesskette des Mikrourformen. Grundlagen, Technologien, Perspektiven. (2009)
4.Kolloquium Mikroproduktion, Bremen, Bremen, 28.-29.Oktober 2009
4.Kolloquium Mikroproduktion. (2009)
Vollertsen, F., Büttgenbach, S., Kraft, O., Michaeli, W.
Fachbeiträge der vier SFB der Mikrotechnik, Bremen, 28.-29.Oktober 2009
Ultrahigh strength single crystalline nanowhiskers grown by physical vapor deposition. (2009)
Richter, G., Hillerich, K., Gianola, D.S., Mönig, R., Kraft, O., Volkert, C.A.
Nano Letters, 9(2009) S..3048-52
A synchrotron tensile test setup for nanocrystalline thin films. (2009)
Ulyanenkova, T., Baumbusch, R., Filatova, T., Doyle, S., Castrup, A., Gruber, P.A., ...
physica status solid (a), 206(2009) S.1795-98
About cracks, dunce caps and new way to stop cracks. (2009)
Mattheck, C., Bethge, K., Sauer, A., Sörensen, J., Wissner, C., Kraft, O.
Fatigue and Fracture Engineering Materials and Structures, 32(2009) S.484-92
Mechanics and structure of the attachment system of English Ivy (Hedera helix L.) (2009)
Melzer, B., Steinbrecher, T., Seidel, R., Kraft, O., Schwaiger, R., Speck, T.
Thibaut, B. [Hrsg.]
Steinbrecher, T., Kraft, O., Speck, T., Melzer, B., Schwaiger, R.
Thibaut, B. [Hrsg.]
Materials Research Society Fall Meeting, Boston, Mass., November 30 - December 4, 2009
Abbau von Kerbspannungen ohne Formoptimierung. (2009)
Mattheck, C., Sörensen, J., Bethge, K., Tesari, I., Kraft, O.
Konstruktionspraxis, (2009) Nr.12, S.12-13
Senger, J., Weygand, D., Motz, C., Gumbsch, P., Kraft, O.
Materials Research Society Fall Meeting, Boston, Mass., November 30 - December 4, 2009
Fatigue in Al thin films stressed at ultra-high frequencies. (2009)
Courty, D., Eberl, C., Gnielka, T., Ruile, W., Kraft, O.
Materials Research Society Fall Meeting, Boston, Mass., November 30 - December 4, 2009
Anelastic behavior of nanocrystalline nickel and nanoporous metals. (2009)
Briot, N., Lohmiller, J., Eberl, C., Kraft, O., Balk, T.
Materials Research Society Fall Meeting, Boston, Mass., November 30 - December 4, 2009
Legros, M, Mompiou, F., Caillard, D., Gianola, D.S., Sedlmayr, A., Kraft, O., ...
Materials Research Society Fall Meeting, Boston, Mass., November 30 - December 4, 2009
Microcompression experiments on bcc metals. (2009)
Kaufmann, D., Mnig, R., Schneider, A.S., Volkert, C.A., Kraft, O.
Materials Research Society Fall Meeting, Boston, Mass., November 30 - December 4, 2009
Investigations of deformation mechanisms in ultra high strength nanowhiskers. (2009)
Gianola, D.S., Richter, G., Sedlmayr, A., Mönig, R., Roos, B., Volkert, C.A., ...
Materials Research Society Fall Meeting, Boston, Mass., November 30 - December 4, 2009
Correlation between critical temperature and strength of small-scale bcc pillars. (2009)
Schneider, A.S., Kaufmann, D., Clark, B.G., Frick, C.P., Gruber, P.A., Mönig, R., ...
Physical Review Letters, 103(2009) S.105501/1-4
Discrete dislocation simulations of the plasticity of micro-pillars under uniaxial loading (2008)
Senger, J., Weygand, D., Gumbsch, P., Kraft, O.
Recent experiments have shown an unexpected strong size effect in uniaxial compression tests of metallic micro-pillars, such as the flow stress increases with decreasing pillar diameter. In our work,...
Weygand, D., Poignant, M., Gumbsch, P., Kraft, O.
The size-dependent flowstress in uniformly loaded pillars has been modeled using a discrete dislocation dynamics tool. Starting from Frank-Read sources of given length and random orientation, the...
A predictive modeling scheme for wear in pin-on-disc and twin-disc tribometers (2008)
Hegadekatte, V., Kurzenhaeser, S., Huber, N., Kraft, O.
Study of wear in complex micro-mechanical components is often accomplished experimentally using a pin-on-disc and twin-disc tribometer. The present paper proposes an approach that involves a...
Cyclic deformation and fatigue in confined dimensions. (2008)
Kraft, O., Wang, D., Senger, J., Weygand, D., Volkert, C.A.
14th International Symp.on Plasticity & its Current Applications (Plasticity 2008), Kona, Hawaii, January 3-8, 2008
Verformung und Ermüdung in kleinen Dimensionen: Experimente und Versetzungssimulation. (2008)
Vortr.: Ruhruniversität Bochum, 25.Februar 2008
Sind die Versagenskriterien bei SIA und Zugversuch falsch? (2008)
Mattheck, C., Bethge, K., Kraft, O.
Publ.in the web
Kottada, R.S., Schwaiger, R., Weissmüller, J., Markmann, J., Ivanisenko, Y., Kraft, O.
137th Annual Meeting and Exhibition of the Minerals, Metals and Materials Society (TMS 2008), New Orleans, La., March 9-13, 2008
Choi, I.S., Cao, Y., Schwaiger, R., Kraft, O.
137th Annual Meeting and Exhibition of the Minerals, Metals and Materials Society (TMS 2008), New Orleans, La., March 9-13, 2008
Tensile tests of magnetron sputtered nanocrystalline palladium. (2008)
Castrup, A., Gottschalk, S., Hahn, H., Baumbusch, R., Gruber, P., Kraft, O.
72.Jahrestagung der Deutschen Physikalischen Gesellschaft und DPG Frühjahrstagung des Arbeitskreises Festkörperphysik, Fachverband Metall- und Materialphysik, Berlin, 25.-29.Februar 2008
SIA und Zugversuche: Sind die Kriterien falsch? (2008)
Mattheck, C., Bethge, K., Kraft, O.
DEGA, (2008) Nr.12, S.26-27
Castrup, A., Scherer, T., Hahn, H., Schwaiger, R., Kraft, O.
Materials Science and Engineering (MSE) : Congress and Exhibition on Advanced Materials and Processes, Nürnberg,September 1-4, 2008
Vereinfachte Bauteiloptimierung nach dem Vorbild der Natur. (2008)
Mattheck, C., Tesari, I., Bethge, K., Kraft, O.
Forum Tech Transfer, Hannover Messe 2008, Hannover, 21.-25.April 2008
Design in der Natur - biologische Vielfalt als Lehrmeisterin. (2008)
Mattheck, C., Tesari, I., Bethge, K., Kraft, O.
3.Regionales Forum zur biologischen Vielfalt : Biodiversität, Innovations und naturverträgliches Wirtschaften, Stuttgart, 28.April 2008
Bauteiloptimierung nach dem Vorbild der Natur: Die Methode der Zugdreiecke. (2008)
Mattheck, C., Tesari, I., Bethge, K., Wissner, C., Sauer, A., Kappel, R., ...
BIOKON-Stand, Hannover Messe 2008, Hannover, 21.-25.April 2008
Bauteiloptimierung nach dem Vorbild der Natur. (eingeladen) (2008)
Mattheck, C., Tesari, I., Bethge, K., Kraft, O.
DBU Bionik-Wirtschaftsforum, Osnabrück, 8.-9.April 2008
Leichtbau nach dem Vorbild der Natur. (eingeladen) (2008)
Mattheck, C., Kappel, R., Kraft, O.
DBU Bionik-Wirtschaftsforum, Osnabrück, 8.-9.April 2008
Sind Risse Zipfelmützen? Die Methoden der Schubvierecke und die der Zugdreiecke. (2008)
Mattheck, C., Bethge, K., Wissner, C., Kraft, O.
Konstruktionspraxis, (2008) Nr.5 S.16-18
Lifetime prediction for ceramic components under cyclic tensile and torsional loading. (2008)
Härtelt, M., Riesch-Oppermann, H., Schwind, T., Kraft, O.
Heinrich, J.G. [Hrsg.]
Mattheck, C., Tesari, I., Kraft, O.
Projektmeeting des BMBF-Projektes Entwicklung von effizienten, einfach anzuwendenden Konstruktionsprinzipien für technische Bauteile nach dem Vorbild der Natur, Bad Laasphe, 1.April 2008
A simple graphic way to reduce stress concentrations by growth. (2008)
Mattheck, C., Tesari, I., Sauer, A., Bethge, K., Kraft, O.
Brebbia, C.A. [Hrsg.]
Meaning of the 45`0-angle in mechanical design according to nature. (2008)
Mattheck, C., Kappel, R., Kraft, O.
Design and Nature 2008 : 4th Internat.Conf.on Comparing Design in Nature with Science and Engineering, Carvoeiro, P, June 24-26, 2008
Mechanical spectroscopy of nanocrystalline nickel near room temperature. (2008)
Lohmiller, J., Eberl, C., Schwaiger, R., Kraft, O., Balk, T.J.
Scripta Materialia, 59(2008) S.467-70
Fail safe design with crack stoppers and warners. (2008)
Mattheck, C., Wissner, Ch., Bethge, K., Kraft, O.
Brebbia, C.A. [Hrsg.]
Mechanics and morphology of permanent attachment systems of climbing plants. (2008)
Steinbrecher, T., Speck, T., Kraft, O., Schwaiger, R.
Society for Experimental Biology Annual Main Meeting, Marseille, F, July 6-10, 2008
Weygand, D., Poignant, M., Gumbsch, P., Kraft, O.
Materials Science and Engineering A, 483-484(2008) S.188-90
A predictive modeling scheme for wear in tribometers. (2008)
Hegadekatte, V., Kurzenhäuser, S., Huber, N., Kraft, O.
Tribology International, 41(2008) S.1020-31
Modelling and simulation of wear in micro-machines. (2008)
Hegadekatte, V., Kraft, O., Huber, N.
Internat.Symp.on Friction, Wear and Wear Protection, Aachen, April 9-11, 2008
Kurzenhäuser, S., Hegadekatte, V., Schneider, J., Huber, N., Kraft, O., Zum Gahr, K.H.
Microsystem Technologies, 14(2008) S.1839-46
Kurzenhäuser, S., Hegadekatte, V., Schneider, J., Huber, N., Kraft, O., Zum Gahr, K.H.
Kraft, O. [Hrsg.]
A predictive modeling scheme for wear in tribometers. (2008)
Hegadekatte, V., Kurzenhäuser, S., Huber, N., Kraft, O.
34th Leeds-Lyon Symp.on Tribology, Lyon, F, September 4-7, 2007
Mattheck, C., Tesari, I., Kraft, O.
Erfinder Visionen, (2008) Nr.3, S.4
Phase-field modelling for ferroelectric materials. (2008)
Völker, B., Wang, J., Kamlah, M., Kraft, O.
4th Internat.Workshop 'Direct and Inverse Problems in Piezoelectricity', Pommersfelden, September 29 - October 1, 2008
Are the failure criteria of SIA (statics integrated assessment) and tree pulling tests wrong? (2008)
Mattheck, C., Bethge, K., Kraft, O.
Arboricultural Journal, 31(2008) S.181-88
Riesch-Oppermann, H., Härtelt, M., Kraft, O.
International Journal of Materials Research, 99(2008) S.1055-65
Effect of length scale on fatigue life and damage formation in thin Cu films. (2008)
Wang, D., Volkert, C.A., Kraft, O.
Materials Science and Engineering A, 493(2008) S.267-73
Discrete dislocation simulations of the plasticity of micro-pillars under uniaxial loading. (2008)
Senger, J., Weygand, D., Gumbsch, P., Kraft, O.
Scripta Materialia, 58(2008) S.587-90
The attachment of English ivy (Hedera helix L.): Biomechanical aspects. (2008)
Melzer, B., Steinbrecher, T., Kraft, O., Schwaiger, R., Speck, T.
Annual Main Meeting of the Society of Experimental Biology, Marseille, F, July 6-10, 2008
G. CORNELLA, S. LEE, O. KRAFT, W. D. NIX, and J. C. BRAVMAN (2007)
Department Of Materials, G. Cornella, S. Lee, O. Kraft, W. D. Nix, J. C. Bravman
X-ray strain analysis via Generalized Focusing Di#ractometry (GFD) [1], and the concurrent need for accurate values of the unstrained lattice parameter, are discussed. A new method for determining...
Thin Film Workshop, Bangalore, IND, February 4-11, 2007
Eberl, C., Spolenak, R., Kraft, O., Ruile, W., Arzt, E.
Thin Solid Films, 515(2007) S.3291-97
Vortr.: DVM-Arbeitskreis, Dresden, 14.Februar 2007
Fatigue at the sub-micron and nano-scale. (2007)
Kraft, O., Wang, D., Weygand, D., Volkert, C.A.
136th Annual Meeting and Exhibition of the Minerals, Metals and Materials Society (TMS 2007), Orlando, Fla., February 25 - March 1, 2007
Weygand, D., Senger, J., Kraft, O., Gumbsch, P.
71.Jahrestagung der Deutschen Physikalischen Gesellschaft und DPG Frühjahrstagung des Arbeitskreises Festkörperphysik, Fachverband Metall- und Materialphysik, Regensburg, 26.-30.März 2007
Plasticity of thin polycrystalline metallic films: a discrete dislocation dynamics approach. (2007)
Senger, J., Weygand, D., Kraft, O., Gumbsch, P.
71.Jahrestagung der Deutschen Physikalischen Gesellschaft und DPG Frühjahrstagung des Arbeitskreises Festkörperphysik, Fachverband Metall- und Materialphysik, Regensburg, 26.-30.März 2007
Charakterisierung von Werkstoffen, mechanische Prüfung und Simulationswerkzeuge. (2007)
16.FIF-Workshop, Karlsruhe, 22.-23.März 2007
Lebensdauervorhersage für keramische Bauteile unter zyklischer Zug- und Torsionsbelastung. (2007)
Härtelt, M., Riesch-Oppermann, H., Schwind, T., Kraft, O.
Symp.Hochleistungskeramik, Dresden, 20.-21.März 2007
Size effects in fatigue of metallic materials. (2007)
Wang, D., Volkert, C., Weygand, D., Kraft, O.
Size-dependent Materials Behaviour : Challenges in Miniaturisation and Experimental Characterisation ; SizeDepEn Workshop, Freiburg, March 15-16, 2007
Design, production and quality assurance of molded micro-parts made of metals and ceramics. (2007)
Ruprecht, R., Beck, T., Haußelt, J., Kraft, O., Loehe, D.
PM Asia 2007 : Advancing PM Technology, Conf.and Exhibition, Shanghai, China, April 2-4, 2007
Vortr.: Erich-Schmid-Institut, Leoben, A, 19.Mai 2007
Deformation and fatigue at the sub-micron and nano-scale. (2007)
10th Internat.Conf.on the Mechanical Behavior of Materials (ICM10), Busan, Korea, May 27-30, 2007
Deformation of thin wires under torsional loading. (2007)
McMat 2007 : ASME Applied Mechanics and Materials Conf., Austin, Tex., June 3-7, 2007
Lifetime prediction for ceramic components under cyclic tensile and torsional loading. (2007)
Härtelt, M., Riesch-Oppermann, H., Schwind, T., Kraft, O.
10th Internat.Conf.and Exhibition of the European Ceramic Society, Berlin, June 17-21, 2007
In situ SEM observation of deformation of nanocrystalline Ni micro-pillars. (2007)
Schwaiger, R., Moser, B., Kraft, O.
Workshop on In Situ Methods in Nanomechanics, Lawrence Berkeley Laboratory, Berkeley, Calif., August 2-3, 2007
Fatigue at ultra high frequencies in sub-micron thin metal films. (2007)
Kraft, O., Eberl, C., Walcker, A.
4th Internat.Conf.on Very High Cycle Fatigue (VHCF-4), Ann Arbor, Mich., August 19-22, 2007
Better resolution of mechanical strength data using advanced stochastic tools. (2007)
Riesch-Oppermann, H., Kraft, O., Riva, M., Hoffmann, M.J.
10th European Congress and Exhibition on Advanced Materials and Processes (Euromat 2007), Nürnberg, September 10-13, 2007
Uncertainty analysis of reliability predictions for brittle fracture. (2007)
Riesch-Oppermann, H., Scherrer-Rudiy, S., Erbacher, T., Kraft, O.
Engineering Fracture Mechanics, 74(2007) S.2933-42
Lebensdauervorhersage für keramische Bauteile bei zyklischer Ermüdung. (2007)
Härtelt, M., Riesch-Oppermann, H., Kraft, O.
Zum Gahr, K.H. [Hrsg.]
Fail Safe Design mit Stoppers und Warners. (2007)
Mattheck, C., Bethge, K., Tesari, I., Wissner, C., Kraft, O.
Poster im Internet
Mechanical characterization and modeling of brazed EUROFER-tungsten-joints. (2007)
Chehtov, T., Aktaa, J., Kraft, O.
Journal of Nuclear Materials, 367-370(2007) S.1228-1232
Werkstoffwahl - Rissstopper - Warner. (2007)
Kraft, O., Mattheck, C., Bethge, K.
Seminar 'Warum alles kaputt geht', Forschungszentrum Karlsruhe, 23.Oktober 2007
Kraft, O., Haußelt, J., Ruprecht, R., Emmerich, B.
Kraft, O. [Hrsg.]
Fatigue and thermal fatigue damage analysis of thin metal films. (2007)
Zhang, G.P., Volkert, C.A., Schwaiger, R., Mönig, R., Kraft, O.
Microelectronics Reliability, 47(2007) S.2007-13
Die Zipfelmütze als effektive Rissgestalt. (2007)
Mattheck, C., Bethge, K., Wissner, C., Kraft, O.
Poster im Internet
Virtuelle Werkstoffentwicklung für hochleistungsfeste Metallisierungen (HOME). (2007)
Kraft, O., Gumbsch, P., Courty, D., Gnielka, T., Eberl, C., Ruile, W., ...
3.WING-Konf., Berlin, 22.-24.Oktober 2007
High cycle contact fatigue studied by cyclic nanoindentation. (2007)
Knyrim, J., Kraft, O., Schwaiger, R.
Materials Research Society Fall Meeting, Boston, Mass., November 26-30, 2007
Übersichtsvortrag Sonderforschungsbereich 499: Mikro-Urformen. (eingeladen) (2007)
Kolloquium Mikroproduktion : Fortschritte, Verfahren, Anwendungen, Karlsruhe, 22.-23.November 2007
Reliability studies of micro-optical components in NEMO (2006)
Berghmans, Francis, Van Uffelen, Marco, Eve, S., Ernst, E., Last, A., Rabus, D., ...
We discuss on-going reliability studies of micro-optical components and assemblies as conducted in the EU FP6 Network of Excellence on Micro-Optics "NEMO". We focus on three case studies including...
Damage analysis in Al thin films fatigued at ultrahigh frequencies (2006)
Eberl, C., Spolenak, R., Kraft, O., Kubat, F., Ruile, W., Arzt, E.
Ultra high-cycle fatigue in pure Al thin films and line structures (2006)
Eberl, C., Spolenak, R., Arzt, E., Kubat, F., Leidl, A., Ruile, W., ...
Kraft, O., Natkaniec, K., Pawlus, J., Stepien, A., Wasilewska-Radwanska, M.
Numer specjalny czasopisma "Polish Journal of Environmental Studies" (2006, vol. 15, No. 4A)
Lernen vom Bananenblatt. (2006)
Mattheck, C., Kappel, R., Bethge, K., Kraft, O.
Konstruktionspraxis Special, (2005) II, S.50-52
CA`3O - Klebeverbindungsoptimierung nach dem Vorbild der Natur. (2006)
Munzinger, M., Mattheck, C., Kraft, O.
Bruchmechanik von Grenzflächen : 38.Tagung des DVM-Arbeitskreises Bruchvorgänge, Aachen, 14.-15.Februar 2006
Biaxial fatigue testing of micro-optical components. (2006)
Eve, S., Ernst, E., Last, A., Rabus, D., Huber, N., Kraft, O.
NEMO Scientific Networking Meeting, Karlsruhe, February 9-10, 2006
Martensitic transformation and microstructure of sputter-deposited Ni-Mn-Ga films. (2006)
Chernenko, V.A., Kohl, M., L'vov, V.A., Kniazkyi, V.M., Ohtsuka, M., Kraft, O.
Materials Transactions, 47(2006) S.619-24
Fatigue of thin copper films. (2006)
Volkert, C.A., Wang, D., Mönig, R., Zhang, G.P., Kraft, O.
9th Internat.Fatigue Congress, Atlanta, Ga., May 14-19, 2006
Biaxial fatigue testing of thin films. (2006)
Eve, S., Huber, N., Ernst, E., Last, A., Schlagenhof, M., Kraft, O.
Zschech, E. [Hrsg.]
Reliability studies of micro-optical components in NEMO. (2006)
Berghmans, F., Van Uffelen, M., Eve, S., Ernst, E., Last, A., Rabus, D., ...
Photonics Europe - Showcasing the Age of Light, Strasbourg, F, April 3-7, 2006
Size effects on deformation and fatigue of thin films and small structures. (2006)
Workshop to Mark the Opening of Cambridge Micro-Mechanical Testing Center (CAMTEC), Cambridge, GB, April 11, 2006
Fatigue of thin metal films at the submicron and nano scale. (eingeladen) (2006)
Wang, D., Volkert, C., Eve, S., Huber, N., Zhang, G.P., Kraft, O.
MRS Spring Meeting, San Francisco, Calif., April 17-21, 2006
Vortr.: Max-Planck-Institut für Plasmaphysik, Garching, 11.Mai 2006
Verformung und Ermüdung in kleinen Dimensionen: Experiment und Simulation. (eingeladen) (2006)
Vortr.: Technische Universität Darmstadt, 17.Mai 2006
In Seilen denken! Leichter, weil zugbetont mit Stahl konstruieren. (2006)
Mattheck, C., Kappel, R., Tesari, I., Kraft, O.
Bionik Industriekongress, Berlin, 1.-2.März 2006
Damage analysis in Al thin films fatigued at ultrahigh frequencies. (2006)
Eberl, C., Spolenak, R., Kraft, O., Kubat, F., Ruile, W., Arzt, E.
Journal of Applied Physics, 99(2006) S.113501/1-8
Length-scale-controlled fatigue mechanisms in thin copper films. (2006)
Zhang, G.P., Volkert, C.A., Schwaiger, R., Wellner, P., Arzt, E., Kraft, O.
Acta Materialia, 54(2006) S.3127-39
Fatigue failure of metal thin films in MEMS. (2006)
TMS Annual Meeting, Symp.on Mechanical Behavior of Thin Films and Small Structures, San Francisco, Calif., February 13-17, 2005
Munzinger, M., Kraft, O., Mattheck, C.
Journal of Materials Research, 21(2006) S.2011-17
Ultra high-cycle fatigue in pure Al thin films and line structures. (2006)
Eberl, C., Spolanek, R., Arzt, E., Kubat, F., Leidl, A., Ruile, W., ...
Materials Science and Engineering A, 421(2006) S.68-76
Qantitative analysis of ultra high cycle fatigue damage in thin metal films. (2006)
Courty, D., Jewula, T., Ruile, W., Kraft, O.
Gordon Research Conf.on Thin Film and Small Scale Mechanical Behavior, Waterville, Maine, July 30 - August 4, 2006 (Poster)
Ultra high cycle fatigue in small scale volumes. (2006)
Eberl, C., Walker, A., Kraft, O.
Gordon Research Conf.on Thin Film and Small Scale Mechanical Behavior, Waterville, Maine, July 30 - August 4, 2006
Weygand, D., Poignant, M., Kraft, O., Gumbsch, P.
12th Internat.Symp.on Plasticity, Halifax, CDN, July 17-22, 2006
Modelling and simulation of dry sliding wear. (2006)
Hegadekatte, V., Huber, N., Kraft, O.
Tribology : Opportunities for Scientific and Technical Advancement, Gordon Research Conf., Waterville, Me., June 18-23, 2006 (Poster)
Modeling and simulation of wear in micro gears. (2006)
Huber, N., Hegadekatte, V., Kraft, O.
Gumbsch, P. [Hrsg.]
Kraft, O., Wang, D., Eve, S., Poignant, M., Schwaiger, R., Volkert, C., ...
Vortr.: Chinese Academy of Science, Shenyang, ?? . September 2006
Huber, N., Tyulyukovskiy, E., Kraft, O.
Philosophical Magazine, 86(2006) S.5505-19
Eve, S., Huber, N., Kraft, O., Last, A., Rabus, D., Schlagenhof, M.
Review of Scientific Instruments, 77(2006) S.103902/1-8
Modeling and simulation of wear in a pin on disc tribometer. (2006)
Hegadekatte, V., Huber, N., Kraft, O.
Proc.of the STLE/ASME Internat.Joint Tribology Conf., San Antonio, Tex., October 23-25, 2006
Verformung und Ermüdung von kleinen Strukturen: Experimente und Simulation. (eingeladen) (2006)
Vortr.: Universität Erlangen, 21.November 2006
Progress in modeling and simulation of ferroelectric materials. (2006)
Kamlah, M., Fett, T., Laskewitz, B., Zhou, D., Kraft, O.
3rd Korean-German Science and Technology Forum, Seoul, Korea, October 28 - November 1, 2006
Length-scale effects on fatigue of thin Cu films. (2006)
Wang, D., Volkert, C.A., Gruber, P., Kraft, O.
Fall Meeting 2006 of the Materials Research Society, Boston, Mass., November 27 - December 1, 2006
Fatigue and thermal fatigue damage analysis of thin metal films. (2006)
Zhang, G.P., Volkert, C.A., Schwaiger, R., Mönig, R., Kraft, O.
Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems : Proc.of EuroSimE 2006, Como, I, April 24-26, 2006
Damage behavior of 200-nm thin copper films under cyclic loading (2005)
Zhang, G. P., Volkert, C. A., Schwaiger, R., Arzt, E., Kraft, O.
Crack nucleation and propagation during fatigue of thin metal films. (eingeladen) (2005)
Kraft, O., Schwaiger, R., Zhang, G.P., Volkert, C.A.
11th Internat.Conf.on Fracture, Torino, I, March 20-25, 2005
Finite element based simulation of dry sliding wear. (2005)
Hegadekatte, V., Huber, N., Kraft, O.
Modeling and Simulation in Materials Science and Engineering, 13(2005) S.57-75
Damage behavior of 200-nm thin copper films under cyclic loading. (2005)
Zhang, G.P., Volkert, C.A., Schwaiger, R., Arzt, E., Kraft, O.
Journal of Materials Research, 20(2005) S.201-07
A finite element based method for wear simulation in microsystems. (2005)
Hegadekatte, V., Huber, N., Kraft, O.
1st Vienna Internat.Conf.on Micro- and Nano-Technology, Wien, A, March 9-11, 2005
Methoden zur Verschleißbewertung in keramischen Mikrogetrieben. (2005)
Hegadekatte, V., Herz, J., Huber, N., Kraft, O., Schneider, J., Zum Gahr, K.H.
Dilthey, U. [Hrsg.]
Microscopic investigation of strain localization and fatigue damage in thin Cu films. (2005)
Zhang, G.P., Volkert, C.A., Schwaiger, R., Kraft, O.
Zhong, Z.Y. [Hrsg.]
Reliability of MEMS: experiments and modelling. (eingeladen) (2005)
Vortr.: Sandia National Laboratory, Livermore, Calif., 21.Februar 2005
Zuverlässigkeit in der Mikrosystemtechnik: Experiment und Modellierung. (eingeladen) (2005)
Vortr.: Fraunhofer Institut für Werkstoffmechanik, Halle, 10.März 2005
High cycle fatigue damage in thin Cu films. (2005)
Wang, D., Volkert, C.A., Kraft, O.
2005 Spring Meeting of the Materials Research Society, San Francisco, Calif., March 28 - April 1, 2005
Roudi, S., Riesch-Oppermann, H., Kraft, O.
Materialwissenschaft und Werkstofftechnik, 36(2005) S.171-76
A fast design-tool for ceramics under static and cyclic contact loading. (2005)
Huber, N., Licht, V., Hegadekatte, V., Kraft, O.
11th Internat.Conf.on Fracture, Torino, I, March 20-25, 2005
Fatigue failure of coarse-grained alumina under contact loading. (2005)
Materialwissenschaft und Werkstofftechnik, 36(2005) S.163-70
Failure assessment of alumina in unlubricated unidirectional sliding contact. (2005)
Tyulyukovskiy, E., Huber, N., Kraft, O.
Materialwissenschaft und Werkstofftechnik, 36(2005) S.157-62
Mattheck, C., Kappel, R., Tesari, I., Kraft, O.
11.VTA Spezialseminar 'Messen und Beurteilen am Baum', Karlsruhe, 19.-20.April 2005
Geist oder Fleiß. Ein praxisgerechter Zugang zur Kerbformoptimierung. (2005)
Mattheck, C., Bethge, K., Tesari, I., Scherrer, M., Kraft, O.
Der Konstrukteur, (2005) Nr.6, S.58-60
Effect of calcium additions on the creep behavior of magnesium die-cast alloy ZA85. (2005)
Vogel, M., Kraft, O., Arzt, E.
Symp. 'Phase Transformations and Deformation inMagnesium Alloys', Spring TMS Meeting, Charlotte, N.C., March 14-17, 2004
Effect of calcium additions on the creep behavior of magnesium die-cast alloy ZA85. (2005)
Vogel, M., Kraft, O., Arzt, E.
Metallurgical and Materials Transactions A, 36(2005) S.1713-19
Microstructure and thermo-mechanical behavior of NiAl coatings. (2005)
Dehm, G., Riethmüller, J., Wellner, P., Kraft, O., Clemens, H., Arzt, E.
Mills, M.J. [Hrsg.]
Inertial effects on dislocation damping under cyclic loading with ultra-high frequencies. (2005)
Walcker, A., Weygand, D., Kraft, O.
Dislocation 2004 : Internat.Conf.on the Fundamentals of Plastic Deformation, La Colle-sur-Loup, F, September 13-17, 2004
Inertial effects on dislocation damping under cyclic loading with ultra-high frequencies. (2005)
Walcker, A., Weygand, D., Kraft, O.
Materials Science and Engineering A, 400-401(2005) S.397-400
Development of a simulation tool for wear in microsystems. (2005)
Hegadekatte, V., Huber, N., Kraft, O.
Microengineering of Metals and Ceramics
Entwicklung eines Simulationswerkzeugs für die Verschleißberechnung. (2005)
Huber, N., Hegadekatte, V., Kraft, O.
Sitzung des Arbeitskreises Materialkundliche Aspekte der Tribologie und der Zerspanung der Deutschen Gesellschaft für Materialkunde, Karlsruhe, 7.April 2005
Mechanical and thermal fatigue of thin Cu films and interconnects. (2005)
Volkert, C.A., Mönig, R., Park, Y.B., Wang, D., Kraft, O., Zhang, G.P.
8th Internat.Workshop on Stress-Induced Phenomena in Metallization, Dresden, September 12-14, 2005
A finite element based technique for simulating sliding wear. (2005)
Hegadekatte, V., Huber, N., Kraft, O.
3rd World Tribology Congress, Washington, D.C., September 12-16, 2005
Is there a universal notch contour following nature? (2005)
Mattheck, C., Bethge, K., Tesari, I., Scherrer, M., Kraft, O.
3rd Internat.Symp.on Adaptive Motion in Animals and Machines (AMAM 2005), Ilmenau, September 25-30, 2005 (Poster)
Gibt es eine Universalkerbkontur nach dem Vorbild der Natur? (2005)
Mattheck, C., Bethge, K., Tesari, I., Scherrer, M., Kraft, O.
10.Fraunhofer IPA Anwenderforum - Rapid Product Development, Stuttgart, 28.September 2005
Mechanical characterization and modeling of brazed joints of refractory alloys. (2005)
Chehtov, T., Kraft, O., Aktaa, J.
21st IEEE/NPSS Symp.on Fusion Engineering (SOFE 05), Knoxville, Tenn., September 26-29, 2005
Biaxial fatigue testing of thin films. (2005)
Eve, S., Huber, N., Ernst, E., Last, A., Schlagenhof, M., Kraft, O.
8th Internat.Workshop on Stress-Induced Phenomena in Metallization, Dresden, September 12-14, 2005
Biaxial fatigue testing of micro-optical components. (2005)
Eve, S., Huber, N., Ernst, E., Last, A., Schlagenhof, M., Kraft, O.
European Congress on Advanced Materials and Processes (Euromat 2005), Praha, CZ, September 5-8, 2005
Size effects on the deformation and fatigue behavior of thin metal films. (2005)
Vortr.: John Hopkins University, Baltimore, Md., 1.Dezember 2005
Mechanical characterization and modeling of brazed EUROFER-tungsten-joints. (2005)
Chehtov, T., Aktaa, J., Kraft, O.
12th Internat.Conf.on Fusion Reactor Materials (ICFRM-12), Santa Barbara, Calif., December 4-9, 2005
Size effects on the fatigue behavior of thin metal films. (2005)
Kraft, O., Wang, D., Schwaiger, R., Volkert, C.A., Zhang, G.P.
Vortex and Magnetohydrodynamics : Structure, Symmetry and Singularity, Euromech Colloquium 461, Groningen, NL, June 12, 2005
Innovative stochastische Methoden für die Zuverlässigkeitsbewertung keramischer Bauteile. (2004)
Roudi, S., Riesch-Oppermann, H., Kraft, O.
Zum Gahr, K.H. [Hrsg.]
Journal of Materials Research, 19(2004) S.315-24
Zuverlässigkeitsbewertung thermomechanisch belasteter Mikrobauteile. (2004)
Büttner, J., Huber, N., Bruns, M., Kraft, O.
5.Statuskolloquium des Programms Mikrosystemtechnik, Karlsruhe, 10.-11.Februar 2004
Tyulyukovsky, E., Shakhvorostov, D., Kraft, O., Huber, N.
5.Statuskolloquium des Programms Mikrosystemtechnik, Karlsruhe, 10.-11.Februar 2004
Tyulyukovskiy, E., Kraft, O., Huber, N.
Hochbeanspruchte Gleit- und Friktionssysteme auf Basis Ingenieurkeramischer Werkstoffe : 2.Statuskolloquium des DFG-Sonderforschungsbereichs 483, Karlsruhe, 27.Januar 2004 (Poster)
The role of precipitates for the creep behavior of magnesium die-cast alloys. (2004)
Kraft, O., Vogel, M., Arzt, E.
133rd Annual Meeting and Exhibition of the Minerals, Metals and Materials Society (TMS), Charlotte, N.C., March 14-18, 2004
Creep of aluminum-based closed-cell foams. (2004)
Haag, M., Wanner, A., Clemens, H., Zhang, P., Kraft, O., Arzt, E.
Metallurgical and Materials Transactions A, 34(2004) S.2809-17
Cyclic deformation and fatigue in thin metal films. (2004)
Kraft, O., Mönig, R., Zhang, G.P., Volkert, C.A.
133rd Annual Meeting and Exhibition of the Minerals, Metals and Materials Society (TMS), Charlotte, N.C., March 14-18, 2004
Deformation and fatigue in polycrystalline metallic thin films. (2004)
2nd Korean-German Symp.on Interfaces in Solids, RWTH Aachen, March 22-23, 2004
Thermal fatigue damage and failure in thin Cu films. (2004)
Volkert, C.A., Mönig, R., Zhang, G.P., Kraft, O.
15th Colloquium on Fundamental Fatigue Mechanisms, Erlangen, April 1-2, 2004
Mechanical properties of nanoporous Au. (2004)
Volkert, C.A., Schwaiger, R., Dietz, T., Kramer, D., Weissmüller, J., Kraft, O.
Spring Meeting of the Materials Research Society, San Francisco, Calif., April 12-16, 2004
Channel cracking of #b-NiAl thin films on Si substrates. (2004)
Wellner, P., Kraft, O., Dehm, G., Anderson, J., Arzt, E.
Acta Materialia, 52(2004) S.2325-36
Deformation behaviour of nanoporous Au. (2004)
Volkert, C.A., Schwaiger, R., Dietz, T., Kramer, D., Weissmüller, J., Kraft, O.
7th Internat.Conf.on Nanostructured Materials, Wiesbaden, June 20-24, 2004
Nucleation model for hcp martensite: application to Co thin films. (2004)
Hesemann, H.T., Müllner, P., Kraft, O., Arzt, E.
Internat.Conf.on Martensitic Transformations (ICOMAT 02), Espoo, SF, June 10-14, 2002
Modeling and finite element simulation of a solder joint. (2004)
Chehtov, T.H., Huber, N., Kraft, O.
Gordon Research Conf.on High Temperature Materials Processes and Diagnostics, Colby College, Waterville, Maine, August 1-6, 2004
Mechanical behavior of Pt and Pt-Ru solid solution alloy thin films. (2004)
Hyun, S., Kraft, O., Vindi, R.P.
Acta Materialia, 52(2004) S.4199-4211
3D analysis of microstructures by focused ion beam microscopy. (2004)
Volkert, C.A., Eberl, C., Mönig, R., Walter, M., Kraft, O.
Gundlach, C. [Hrsg.]
In Seilen denken. Einfache Anleitung für naturnahes Konstruieren. (2004)
Mattheck, C., Kappel, R., Tesari, I., Kraft, O.
Konstruktionspraxis, (2004) Nr.9, S.26-29
Gibt es eine Universalkerbkontur nach dem Vorbild der Natur? (2004)
Mattheck, C., Bethge, K., Tesari, I., Scherrer, M., Kraft, O.
Materialwissenschaft und Werkstofftechnik, 35(2004) S.582-86
Elektromigration in thin film Cu and Al interconnects. (2004)
Internat.Workshop on Energy Dissipation at Surfaces, Duisburg, 27.-30.September 2004
Summer School on Nanomaterials Science and Engineering, Stuttgart, September 27, 2004
Size effects in the plastic deformation of NiAl thin films. (2004)
Wellner, P., Dehm, G., Kraft, O., Arzt, E.
Zeitschrift für Metallkunde, 95(2004) S.769-78
Reliability issues in MEMS related to cyclic loading conditions. (eingeladen) (2004)
Proc.of the ASME Internat.Mechanical Engineering Congress (IMECE 2004), Anaheim, Calif., November 14-19, 2004
Ultra high-cycle fatigue in pure Al thin films. (2004)
Eberl, C., Spolenak, R., Kraft, O., Kubat, F., Ruile, W., Arzt, E.
Fall Meeting 2004 of the Materials Research Society, Boston, Mass., November 29 - December 3, 2004
Reliability assessment of a gas microsensor. (2004)
Büttner, J., Huber, N., Bruns, M., Kraft, O.
IEEE Transactions on Device and Materials Reliability, 4(2004) S.549-55
Texture dependence of the martensitic transformation in cobalt thin films (2003)
Hesemann,H. T., Müllner,P., Kraft,O., Nowak,D., Baker,S. P., Finkelstein,K., ...
Creep of aluminum-based closed-cell foams (2003)
Haag, M., Wanner, A., Clemens, H., Zhang, P., Kraft, O., Arzt, E.
Texture dependence of the martensitic transformation in cobalt thin films (2003)
Hesemann, H. T., Müllner, P., Kraft, O., Nowak, D., Baker, S. P., Finkelstein, K., ...
High Cycle Fatigue in metals: A pop-out mechanism in thin Al films. (2003)
Eberl, C., Spolenak, R., Kraft, O., Kubat, F., Leidl, A., Arzt, E.
Frühjahrstagung des Arbeitskreises Festkörperphysik (AKF) der DPG, Fachverband Metallphysik (M), Dresden, 24.-28. März 2003
Size effects in the fatigue behavior of thin Ag films. (2003)
Acta Materialia, 51(2003) S.195-206
Cyclic deformation of polycrystalline Cu films. (2003)
Schwaiger, R., Dehm, G., Kraft, O.
Philosophical Magazine, 83(2003) S.693-710
Creep behavior of magnetism die-cast alloy ZA85. (2003)
Vogel, M., Kraft, O., Arzt, E.
Scripta Materialia, 48(2003) S.985-90
The influence of grain size on the fatigue behavior of thin polycrystalline films. (2003)
Kraft, O., Volkert, C.A., Schwaiger, R., Wellner, P., Mönig, R., Zhang, G., ...
MRS Spring Meeting, Symp.'Mechanical Properties Derived from Nanostructuring Materials', San Francisco, Calif., April 21-25, 2003
Vogel, M., Kraft, O., Staron, P., Clemens, H., Rauh, R., Arzt, E.
Zeitschrift für Metallkunde, 94(2003) S.564-71
Kerbformoptimierung ohne FEM: Ein einfacher Weg, um Kerbspannungen abzubauen. (2003)
Mattheck, C., Scherrer, M., Tesari, I., Kraft, O.
Materialwissenschaft und Werkstofftechnik, 34(2003) S.514-515
Constraint effects of film thickness and grain size in fatigued metal thin films. (2003)
Zhang, G.P., Schwaiger, R., Eberl, C., Volkert, C.A., Kraft, O.
14th Colloquium on Fundamental Fatigue Mechanics, Dresden, April 3-4, 2003
TEM investigation of fatigue damage in Cu thin films and interconnects. (2003)
Zhang, G.P., Mönig, R., Schwaiger, R., Volkert, C.A., Kraft, O.
9th Internat.Conf.on the Mechanical Behavior of Materials (ICM9), Geneve, CH, May 25-29, 2003
Zhang, G.P., Schwaiger, R., Volkert, C.A., Kraft, O.
Philosophical Magazine Letters, 83(2003) S.477-483
The effects of grain size and film thickness on cyclic deformation and fatigue in thin films. (2003)
Vortr.: European Office of Aerospace Research and Development, Breitnau, 29.Juli 2003
Mechanical testing of materials in small volumes by nanoindentation and microbeam bending. (2003)
Kraft, O., Huber, N., Tioulioukovski, E., Schwaiger, R.
Akiniwa, Y. [Hrsg.]
Mc Kerrow, A.J., Leu, J., Kraft, O., Kikkawa, T., [Hrsg.]
Warrendale, Pa. : Materials Research Society, 2003
Büttner, J., Licht, V., Huber, N., Kraft, O.
Sitzung des Fachausschusses Computersimulation und des Arbeitskreises Mikrostrukturmechanik der DGM, Düsseldorf, 24.November 2003
Ermüdung in dünnen Metallschichten mit Korngrößen im Submikrometer-Bereich. (2003)
Vortr.: Technische Universität Darmstadt, 3.November 2003
Cyclic deformation and fatigue in thin metal films on substrates. (2003)
Internat. Conf. on Materials for Advanced Technologies (ICMAT2003), IUMRS-ICA 2003 Internat.Conf.in Asia, Symposium 'J' Synchrotron Radiation for Advanced Materials Analysis and Processing,...
Interconnect Failure due to Cyclic Loading (2002)
Keller,R. R., Mönig,R., Volkert,C. A., Arzt,E., Schwaiger,R., Kraft,O.
3-D focused ion beam mapping of nanoindentation zones in a Cu- Ti multilayered coating (2002)
Steer, T. J., Möbus, G., Kraft, O., Wagner, T., Inkson, B. J.
Interconnect Failure due to Cyclic Loading (2002)
Keller, R. R., Mönig, R., Volkert, C. A., Arzt, E., Schwaiger, R., Kraft, O.
Tioulioukovski, E., Huber, N., Kraft, O.
Gordon Research Conf.'Thin Film Mechanical Behavior', Waterville, Maine, July 14-19, 2002
3D FIB and AFM mapping of nanoindentation zones (2001)
Steer, T. J., Möbus, G., Kraft, O., Wagner, T., Inkson, B. J.
Holloway,B. C., Kraft,O., Shuh,D. K., Nix,W. D., Kelly,M., Pianetta,P., ...