Mechanical behavior of nickel base foams for diesel particle filter applications (2009)
Duchamp, M., Forest, S., Bienvenu, Y., Walther, G., Saberi, S., ...
Open-cell Ni foams are mainly used as battery electrodes. The very large specific surface of the INCOFOAM pure Ni foams also leads to outstanding filtration properties. A Diesel Particulate Filter...
Laser beam welding of metal-supported automotive catalytic converters (2004)
El Kadiri, H., Dahmen, M., Bienvenu, Y., Malot, T., Horstemeyer, M.
We performed laser welding tests on 45µm and 95µm thick Fe20Cr5Al foils of Sandvik 0C404 in order to study the welding feasibility of the catalytic converter monolith. In accordance with the...
Youseffi, M, Wronski, AS, Ansara, I, Durand-Charre, M, Mascarenhas, J, ...
Calculated multicomponent phase diagrams were used to identify high speed steel (HSS) type alloys having the potential to exhibit enhanced sinterability. The requirement was for an extensive...
Bienvenu, Y., Bracho-Toconis, C., Lemaitre, G., Schwartz, F.
This paper concerned metals in some important way and contained information about, utilized, or discussed these subjects: basic topics: experimental materials and material types:...
Processing and Microstructural Studies of P/M and Plasma-Sprayed Gradient Materials. (1998)
Novel graded composite coatings of a few millimeters in thickness exhibiting a continuous evolution from pure tungsten to pure polyethylene, with aluminum and copper as intermediate materials,...
Microstructural and Analytical Characterization of Al2O3-(Al-Mg) Composite Interfaces. (1998)
Molins, R., Bartout, J. D., Bienvenu, Y.
Mechanical properties of composite materials depend on the reactions taking place at the ceramic-matrix interface. this study was devoted to the identification of the mechanisms of interaction for a...
MICROSTRUCTURAL AND ANALYTICAL CHARACTERIZATION OF AL2O3/AL-MG COMPOSITE INTERFACES. (1998)
Molins, R., Bartout, J. D., Bienvenu, Y.
Editions de Physique : France
ON THE FORMATION OF INTERFACIAL CARBIDES IN A CARBON FIBRE-REINFORCED ALUMINIUM COMPOSITE. (1998)
De Sanctis, M., Pelletier, S., Bienvenu, Y.
Elsevier Science Ltd. : Great Britain
Bienvenu, Y, Ansara, I, DurandCharre, M, Oliveira, M, Mascarenhas, J, ...
Background/aims: In a European Union supported project, the idea that the sintering window for a tool steel, i.e., temperature region where full density is reached with no distortion and a sound...
Bienvenu, Y., Decla, F., Garcia, J.
Pas de Résumé disponible
Bienvenu, Y., Decla, F., Garcia, J.
Pas de Résumé disponible
Bienvenu, Y., Decla, F., Garcia, J.
Pas de Résumé disponible
Supersolidus sintering of high-speed steels .2. sintering of tungsten based alloys (1995)
The effect of carbon content on the vacuum sintering characteristics of annealed and cold compacted water atomised type T1 high speed steel powders is reported. It was found that increasing carbon...
Bienvenu, Y., Dupont, M., Schwartz, F., Garcia, J.
Pas de Résumé disponible
Bienvenu, Y., Dupont, M., Schwartz, F., Garcia, J.
Pas de Résumé disponible
Bienvenu, Y., Dupont, M., Schwartz, F., Garcia, J.
Pas de Résumé disponible
Development of oxidation resistant high temperature NbTiAl alloys and intermetallics (1993)
Allouard, M., Bienvenu, Y., Nazé, L., Brancho-Troconis, C.
The effect of alloying elements like Ti, Al, Cr, V and Mo on the oxidation resistance of Nb at high temperature (between 700 °C and 1400 °C) has been studied. The value of the parabolic oxide...
Development of oxidation resistant high temperature NbTiAl alloys and intermetallics (1993)
Allouard, M., Bienvenu, Y., Nazé, L., Brancho-Troconis, C.
The effect of alloying elements like Ti, Al, Cr, V and Mo on the oxidation resistance of Nb at high temperature (between 700 °C and 1400 °C) has been studied. The value of the parabolic oxide...
Development of oxidation resistant high temperature NbTiAl alloys and intermetallics (1993)
Allouard, M., Bienvenu, Y., Nazé, L., Brancho-Troconis, C.
The effect of alloying elements like Ti, Al, Cr, V and Mo on the oxidation resistance of Nb at high temperature (between 700 °C and 1400 °C) has been studied. The value of the parabolic oxide...
MICROSTRUCTURAL AND ANALYTICAL CHARACTERIZATION OF Al2O3/Al-Mg COMPOSITE INTERFACES (1990)
Molins, R., Bartout, J., Bienvenu, Y.
Mechanical properties of composite materials are deeply dependent on the chemical and structural reactions taking place at the ceramic-metal interface. This study was devoted to the identification of...
MICROSTRUCTURAL AND ANALYTICAL CHARACTERIZATION OF Al2O3/Al-Mg COMPOSITE INTERFACES (1990)
Molins, R., Bartout, J., Bienvenu, Y.
Mechanical properties of composite materials are deeply dependent on the chemical and structural reactions taking place at the ceramic-metal interface. This study was devoted to the identification of...
MICROSTRUCTURAL AND ANALYTICAL CHARACTERIZATION OF Al2O3/Al-Mg COMPOSITE INTERFACES (1990)
Molins, R., Bartout, J., Bienvenu, Y.
Mechanical properties of composite materials are deeply dependent on the chemical and structural reactions taking place at the ceramic-metal interface. This study was devoted to the identification of...